2.2.3.15 TLV 15
The following are the constituents of TLV 15 for the WSHV SoHR packet (section 2.2.3). All of the values MUST be present, unless otherwise noted. The values MUST be in this order. The M and R bits are defined in the Protocol Bindings for SoH [TNC-IF-TNCCSPBSoH] and are ignored by the WSHA upon receipt.
|
|
|
|
|
|
|
|
|
|
1 |
|
|
|
|
|
|
|
|
|
2 |
|
|
|
|
|
|
|
|
|
3 |
|
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
M |
R |
TLV_Type |
Length |
||||||||||||||||||||||||||||
|
Security_Updates_ComplianceCode_1 |
|||||||||||||||||||||||||||||||
|
Security_Updates_ComplianceCode_2 |
|||||||||||||||||||||||||||||||
M (1 bit): The M bit MUST be set to zero.
R (1 bit): The R bit is reserved, and MUST be set to zero when sent and ignored on receipt.
TLV_Type (14 bits): A 14-bit unsigned integer that MUST be set to 4.
Length (2 bytes): A 16-bit unsigned integer in network-byte order that MUST indicate the length (4), in bytes, of the Security_Updates_ComplianceCode_1 field if only the Security_Updates_ComplianceCode_1 is used, or length (8) if the Security_Updates_ComplianceCode_2 is also present.
Security_Updates_ComplianceCode_1 (4 bytes): A DWORD, as specified in section 2.2.13.
Security_Updates_ComplianceCode_2 (4 bytes): A DWORD, as specified in section 2.2.14.