Share via


OID_DOT11_CURRENT_CHANNEL_NUMBER (Compact 2013)

3/26/2014

When queried, this OID requests that the miniport driver return the value of the IEEE 802.11 dot11CurrentChannelNumber management information base (MIB) object for the current PHY type on the 802.11 station.

The dot11CurrentChannelNumber MIB object stores the current channel number that is used by the physical media dependent (PMD) sublayer of the current PHY type for transmit and receive operations. For more information about channel numbers, refer to Clause 14.8.2.1.18 of the IEEE 802.11-1999 standard.

Note

Support for OID_DOT11_CURRENT_CHANNEL_NUMBER is mandatory if the network adapter supports the dot11_phy_type_fhss PHY type. For more information about how the miniport driver specifies its list of supported PHY types, see OID_DOT11_SUPPORTED_PHY_TYPES.

The data type for this OID is a ULONG value that specifies the channel number from 0 through 99.

The dot11CurrentChannelNumber MIB object is valid only for the frequency-hopping spread spectrum (FHSS) PHY type. If the current PHY type is not set to dot11_phy_type_fhss, the miniport driver must fail the query request by returning NDIS_STATUS_INVALID_DATA.

If the miniport driver is operating in Extensible Station (ExtSTA) mode, the current PHY type is determined through the ExtSTA msDot11CurrentPhyID MIB object. This MIB object specifies the index of the current PHY type within the 802.11 station’s list of supported PHY types. For more information about msDot11CurrentPhyID, see OID_DOT11_CURRENT_PHY_ID.

Requirements

Header

windot11.h

See Also

Reference

NDIS 5.x Legacy Wireless LAN OIDs
OID_DOT11_SUPPORTED_PHY_TYPES
OID_DOT11_CURRENT_PHY_ID
Native 802.11 MIB OIDs
NDIS 5.x Legacy Reference