Export (0) Print
Expand All

ISpeechPhraseReplacement Code Example (SAPI 5.4)

Speech API 5.4
Microsoft Speech API 5.4

Interface: ISpeechPhraseReplacement


Example

The following Visual Basic form code demonstrates the ISpeechPhraseReplacement interface and its relation to the ISpeechPhraseElement interface. To run this code, create a form with the following controls:

  • A text box called Text1
  • A list box called List1
  • Two command buttons called Command1 and Command2

Paste this code into the Declarations section of the form.

This example is based on the ISpeechPhraseElement code example. Individual phrase elements from the recognition result are listed in the list box. The DisplayAttributes and DisplayText properties of each phrase element are shown. The DisplayAttributes and Text properties of the phrase replacements are displayed next to the elements which can be replaced by them.


Ee125386.ISpeechPhraseReplacement(en-us,VS.85).jpg

Option Explicit

Const WAVEFILENAME = "C:\ISpeechPhraseReplacement.wav"

Dim MyRecognizer As SpeechLib.SpInprocRecognizer
Dim MyGrammar As SpeechLib.ISpeechRecoGrammar
Dim MyFileStream As SpeechLib.SpFileStream
Dim PhraseElem As SpeechLib.ISpeechPhraseElement

Dim PhraseRepl As SpeechLib.ISpeechPhraseReplacement
Dim PhraseRepls As SpeechLib.ISpeechPhraseReplacements

Dim Voice1 As SpeechLib.SpVoice
Dim Voice2 As SpeechLib.SpVoice     'Plays the wave file back

Dim WithEvents MyRecoContext As SpeechLib.SpInProcRecoContext

Private Sub Command1_Click()
    On Error GoTo EH

    List1.Clear

    ' Create ISpeechPhraseReplacement.wav file from text in text box.
    Set MyFileStream = MakeWAVFileFromText(Text1.Text, WAVEFILENAME)

    'Set the file as recognizer's input stream
    MyFileStream.Open WAVEFILENAME
    Set MyRecognizer.AudioInputStream = MyFileStream

EH:
    If Err.Number Then ShowErrMsg
End Sub

Private Sub Command2_Click()
    On Error GoTo EH

    List1.Clear
    MyRecoContext.Recognizer.EmulateRecognition Text1.Text

EH:
    If Err.Number Then ShowErrMsg
End Sub

Private Sub Form_Load()

    ' Create Recognizer, RecoContext, Grammar, and Voice
    Set MyRecognizer = New SpInprocRecognizer
    Set MyRecoContext = MyRecognizer.CreateRecoContext
    Set MyGrammar = MyRecoContext.CreateGrammar(16)
    Set Voice1 = New SpVoice
    Set Voice1.Voice = Voice1.GetVoices("gender=male").Item(0)
    Set Voice2 = New SpVoice

    On Error GoTo EH

    ' Load Grammar with solitaire XML, set active
    MyGrammar.CmdLoadFromFile "c:\sol.xml", SLOStatic
    MyGrammar.CmdSetRuleIdState 0, SGDSActive               'Set C & C active
    MyGrammar.DictationSetState SGDSActive                  'Set Dictation active

    Text1.Text = "I spent twenty-eight dollars on route sixty-six"
    Command1.Caption = "&Recognition;"
    Command2.Caption = "&EmulateRecognition;"

EH:
    If Err.Number Then ShowErrMsg
End Sub

Private Sub SpeakToFile(ByVal strText As String, ByVal strFName As String)
    On Error GoTo EH

    Set MyFileStream = New SpFileStream                    'Create stream
    MyFileStream.Open strFName, SSFMCreateForWrite, True   'Open as the filename
    Set Voice1.AudioOutputStream = MyFileStream                 'Set voice output to file
    Voice1.Speak strText, SVSFIsXML                  'Speak synchronously
    MyFileStream.Close                                     'Close file

EH:
    If Err.Number Then ShowErrMsg
End Sub

Private Sub MyRecoContext_Recognition _
   (ByVal StreamNumber As Long, _
    ByVal StreamPosition As Variant, _
    ByVal RecognitionType As SpeechLib.SpeechRecognitionType, _
    ByVal Result As SpeechLib.ISpeechRecoResult)

    Dim ECount As Integer   'Count of elements
    Dim ii As Integer
    Dim nn As Integer
    Dim R1 As Integer, R2 As Integer

    On Error GoTo EH

    'Arrays with an entry for every PhraseElem
    Dim arrElements() As String
    Dim arrReplaces() As String
    ECount = Result.PhraseInfo.Elements.Count - 1
    ReDim arrElements(ECount)
    ReDim arrReplaces(ECount)

    'Load PhraseElements into an array
    nn = 0
    For Each PhraseElem In Result.PhraseInfo.Elements
        arrElements(nn) = PhraseElem.DisplayAttributes & " " & PhraseElem.DisplayText
        nn = nn + 1
    Next

    'Load PhraseReplacements (if any) in an array
    Set PhraseRepls = Result.PhraseInfo.Replacements
    If Not PhraseRepls Is Nothing Then
        For Each PhraseRepl In PhraseRepls

            'Get the first and last elements
            'replaced by this Replacement
            R1 = PhraseRepl.FirstElement
            R2 = R1 + PhraseRepl.NumberOfElements - 1

            For ii = 0 To ECount
                'Is element within the range of this replacement?
                If (ii >= R1) And (ii <= R2) Then
                    arrReplaces(ii) = PhraseRepl.DisplayAttributes & " " & PhraseRepl.Text
                End If
            Next ii
        Next
    End If

    Dim X As String
    For ii = 0 To ECount

        'Get PhraseElem and pad with blanks
        X = arrElements(ii) & String(15, " ")
        X = Left(X, 15)

        'Put element index in front
        X = "Element" & Format(ii, "00") & ": " & X

        'Put Replacement elements at the end
        X = X & arrReplaces(ii)

        List1.AddItem X
    Next ii

EH:
    If Err.Number Then ShowErrMsg
End Sub

Private Sub MyRecoContext_EndStream _
   (ByVal StreamNumber As Long, _
    ByVal StreamPosition As Variant, _
    ByVal StreamReleased As Boolean)

    On Error GoTo EH

    'Recognition uses the Filestream, EmulateReco does not
    If ActiveControl.Caption = "&Recognition;" Then
        MyFileStream.Close
        DoEvents
        MyFileStream.Open WAVEFILENAME
        Voice2.SpeakStream MyFileStream
        MyFileStream.Close
    End If
    List1.AddItem ""

EH:
    If Err.Number Then ShowErrMsg
End Sub

Private Function MakeWAVFileFromText _
   (ByVal strText As String, _
    ByVal strFName As String) _
    As SpFileStream

    On Error GoTo EH

    ' Declare identifiers:
    Dim FileStream As SpFileStream
    Dim Voice As SpVoice

    ' Instantiate Voice and FileStream objects:
    Set Voice = New SpVoice
    Set FileStream = New SpFileStream

    ' Open specified .wav file, set voice output
    ' to file, and speak synchronously:
    FileStream.Open strFName, SSFMCreateForWrite, True
    Set Voice.AudioOutputStream = FileStream
    Voice.Speak strText, SVSFIsXML

    ' Close file and return reference to FileStream object:
    FileStream.Close
    Set MakeWAVFileFromText = FileStream

EH:
    If Err.Number Then ShowErrMsg
End Function

Private Sub ShowErrMsg()

    ' Declare identifiers:
    Const NL = vbNewLine
    Dim T As String

    T = "Desc: " & Err.Description & NL
    T = T & "Err #: " & Err.Number
    MsgBox T, vbExclamation, "Run-Time Error"
    End

End Sub
Show:
© 2014 Microsoft