NumberingFormats Class

Definition

[DocumentFormat.OpenXml.ChildElementInfo(typeof(DocumentFormat.OpenXml.Spreadsheet.NumberingFormat))]
[DocumentFormat.OpenXml.OfficeAvailability(DocumentFormat.OpenXml.FileFormatVersions.Office2007)]
[DocumentFormat.OpenXml.SchemaAttr(22, "numFmts")]
public class NumberingFormats : DocumentFormat.OpenXml.OpenXmlCompositeElement

public class NumberingFormats : DocumentFormat.OpenXml.OpenXmlCompositeElement

[DocumentFormat.OpenXml.SchemaAttr(22, "numFmts")]
public class NumberingFormats : DocumentFormat.OpenXml.OpenXmlCompositeElement

[DocumentFormat.OpenXml.SchemaAttr("x:numFmts")]
public class NumberingFormats : DocumentFormat.OpenXml.OpenXmlCompositeElement

[DocumentFormat.OpenXml.SchemaAttr("x:numFmts")]
public class NumberingFormats : DocumentFormat.OpenXml.TypedOpenXmlCompositeElement

[DocumentFormat.OpenXml.ChildElementInfo(typeof(DocumentFormat.OpenXml.Spreadsheet.NumberingFormat))]
public class NumberingFormats : DocumentFormat.OpenXml.OpenXmlCompositeElement

[DocumentFormat.OpenXml.ChildElementInfo(typeof(DocumentFormat.OpenXml.Spreadsheet.NumberingFormat))]
[DocumentFormat.OpenXml.OfficeAvailability(DocumentFormat.OpenXml.FileFormatVersions.Office2007)]
public class NumberingFormats : DocumentFormat.OpenXml.OpenXmlCompositeElement

[<DocumentFormat.OpenXml.ChildElementInfo(typeof(DocumentFormat.OpenXml.Spreadsheet.NumberingFormat))>]
[<DocumentFormat.OpenXml.OfficeAvailability(DocumentFormat.OpenXml.FileFormatVersions.Office2007)>]
[<DocumentFormat.OpenXml.SchemaAttr(22, "numFmts")>]
type NumberingFormats = class
    inherit OpenXmlCompositeElement

type NumberingFormats = class
    inherit OpenXmlCompositeElement

[<DocumentFormat.OpenXml.SchemaAttr(22, "numFmts")>]
type NumberingFormats = class
    inherit OpenXmlCompositeElement

[<DocumentFormat.OpenXml.SchemaAttr("x:numFmts")>]
type NumberingFormats = class
    inherit OpenXmlCompositeElement

[<DocumentFormat.OpenXml.SchemaAttr("x:numFmts")>]
type NumberingFormats = class
    inherit TypedOpenXmlCompositeElement

[<DocumentFormat.OpenXml.ChildElementInfo(typeof(DocumentFormat.OpenXml.Spreadsheet.NumberingFormat))>]
type NumberingFormats = class
    inherit OpenXmlCompositeElement

[<DocumentFormat.OpenXml.ChildElementInfo(typeof(DocumentFormat.OpenXml.Spreadsheet.NumberingFormat))>]
[<DocumentFormat.OpenXml.OfficeAvailability(DocumentFormat.OpenXml.FileFormatVersions.Office2007)>]
type NumberingFormats = class
    inherit OpenXmlCompositeElement

Public Class NumberingFormats
Inherits OpenXmlCompositeElement

Public Class NumberingFormats
Inherits TypedOpenXmlCompositeElement

Inheritance

Object

OpenXmlElement

OpenXmlCompositeElement

NumberingFormats

Inheritance

Object

OpenXmlElement

OpenXmlCompositeElement

TypedOpenXmlCompositeElement

NumberingFormats

Attributes

ChildElementInfoAttribute OfficeAvailabilityAttribute SchemaAttrAttribute

Remarks

[ISO/IEC 29500-1 1st Edition]

numFmts (Number Formats)

This element defines the number formats in this workbook, consisting of a sequence of numFmt records, where each numFmt record defines a particular number format, indicating how to format and render the numeric value of a cell.

[Example:

This cell is formatting as US currency:

7fc8d8ee-f580-4e43-98d0-91cf9abd8243

The XML expressing this format shows that the formatId is "166" and the decoded formatCode is $#,##0.00

<numFmts count="1">  
  <numFmt numFmtId="166" formatCode="&quot;$&quot;#,##0.00"/>  
</numFmts>  

end example]

Number Format Codes

Up to four sections of format codes can be specified. The format codes, separated by semicolons, define the formats for positive numbers, negative numbers, zero values, and text, in that order. If only two sections are specified, the first is used for positive numbers and zeros, and the second is used for negative numbers. If only one section is specified, it is used for all numbers. To skip a section, the ending semicolon for that section shall be written.

9e00b419-894b-4a01-aba5-c8c92db922a6

The first section, "Format for positive numbers", is the format code that applies to the cell when the cell value contains a positive number.

The second section, "Format for negative numbers", is the format code that applies to the cell when the cell value contains a negative number.

The third section, "Format for zeros", is the format code that applies to the cell when the cell value is zero.

The fourth, and last, section, "Format for text", is the format code that applies to the cell when the cell value is text.

The & (ampersand) text operator is used to join, or concatenate, two values.

The following table describes the different symbols that are available for use in custom number formats.

Format symbol

Description and result

0

Digit placeholder. [Example: If the value 8.9 is to be displayed as 8.90, use the format #.00 end example]

#

Digit placeholder. This symbol follows the same rules as the 0 symbol. However, the application shall not display extra zeros when the number typed has fewer digits on either side of the decimal than there are # symbols in the format. [Example: If the custom format is #.##, and 8.9 is in the cell, the number 8.9 is displayed. end example]

?

Digit placeholder. This symbol follows the same rules as the 0 symbol. However, the application shall put a space for insignificant zeros on either side of the decimal point so that decimal points are aligned in the column. [Example: The custom format 0.0? aligns the decimal points for the numbers 8.9 and a column. end example]

. (period)

Decimal point.

%

Percentage. If the cell contains a number between 0 and 1, and the custom format 0% is used, the application shall multiply the number by 100 and add the percentage symbol in the cell.

, (comma)

Thousands separator. The application shall separate thousands by commas if the format contains a comma that is enclosed by number signs (#) or by zeros. A comma that follows a placeholder scales the number by one thousand. [Example: If the format is #.0,, and the cell value is 12,200,000 then the number 12.2 is displayed. end example]

E- E+ e- e+

Scientific format. The application shall display a number to the right of the "E" symbol that corresponds to the number of places that the decimal point was moved. [Example: If the format is 0.00E+00, and the value 12,200,000 is in the cell, the number 1.22E+07 is displayed. If the number format is #0.0E+0, then the number 12.2E+6 is displayed. end example]

$-+/():space

Displays the symbol. If it is desired to display a character that differs from one of these symbols, precede the character with a backslash (\). Alternatively, enclose the character in quotation marks. [Example: If the number format is (000), and the value 12 is in the cell, the number (012) is displayed. end example]

\

Displays the next character in the format. The application shall not display the backslash. [Example: If the number format is 0\!, and the value 3 is in the cell, the value 3! is displayed. end example]

*

Repeats the next character in the format enough times to fill the column to its current width. There shall not be more than one asterisk in one section of the format. If more than one asterisk appears in one section of the format, all but the last asterisk shall be ignored. [Example: if the number format is 0*x, and the value 3 is in the cell, the value 3xxxxxx is displayed. The number of x characters that are displayed in the cell varies based on the width of the column. end example]

_ (underline)

Skips the width of the next character. This is useful for lining up negative and positive values in different cells of the same column. [Example: The number format _(0.0_);(0.0) aligns the numbers 2.3 and the column even though the negative number is enclosed by parentheses. end example]

"text"

Displays whatever text is inside the quotation marks. [Example: The format 0.00 "dollars" displays 1.23 dollars when the value 1.23 is in the cell. end example]

@

Text placeholder. If text is typed in the cell, the text from the cell is placed in the format where the at symbol (@) appears. [Example: If the number format is "Bob "@" Smith" (including quotation marks), and the value "John" is in the cell, the value Bob John Smith is displayed. end example]

Text and spacing

Display both text and numbers

To display both text and numbers in a cell, enclose the text characters in double quotation marks (" ") or precede a single character with a backslash (\). Single quotation marks shall not be used to denote text. Characters inside double quotes, or immediately following backslash shall never be interpreted as part of the format code lexicon; instead they shall always be treated as literal strings. Remember to include the characters in the appropriate section of the format codes. [Example: Use the format $0.00" Surplus";$-0.00" Shortage" to display a positive amount as "$125.74 Surplus" and a negative amount as "$-125.74 Shortage." end example]

The following characters are displayed without the use of quotation marks.

$

Dollar sign

-

Minus sign

+

Plus sign

/

Slash mark

(

Left parenthesis

)

Right parenthesis

:

Colon

!

Exclamation point

^

Circumflex accent (caret)

&

Ampersand

'

Apostrophe

~

Tilde

{

Left curly bracket

}

Right curly bracket

<

Less-than sign

Greater-than sign

=

Equal sign

Space character

Include a section for text entry

If included, a text section shall be the last section in the number format. Include an "at" sign (@) in the section, precisely where the cell’s text value should be displayed. If the @ character is omitted from the text section, text typed in the cell will not be displayed. To always display specific text characters with the typed text, enclose the additional text in double quotation marks (" "). [Example: If “June” is typed into the cell, and the text format is "gross receipts for "@ , then the cell will display “gross receipts for June”. end example]

If the format does not include a text section, text entered in a cell is not affected by the format code.

Add spaces

To create a space that is the width of a character in a number format, include an underscore, followed by the character. [Example: When an underscore is followed with a right parenthesis, such as _), positive numbers line up correctly with negative numbers that are enclosed in parentheses because positive numbers are displayed with a blank space after them exactly the width of the right parenthesis character. end example]

Repeat characters

To repeat the next character in the format to fill the column width, include an asterisk (*) in the number format. [Example: Use 0*- to include enough dashes after a number to fill the cell, or use *0 before any format to include leading zeros. end example]

Decimal places, spaces, colors, and conditions

Include decimal places and significant digits

To format fractions or numbers with decimal points, include the following digit placeholders in a section. If a number has more digits to the right of the decimal point than there are placeholders in the format, the number rounds to as many decimal places as there are placeholders. If there are more digits to the left of the decimal point than there are placeholders, the extra digits are displayed. If the format contains only number signs (#) to the left of the decimal point, numbers less than 1 begin with a decimal point.

# (number sign) displays only significant digits and does not display insignificant zeros.

0 (zero) displays insignificant zeros if a number has fewer digits than there are zeros in the format.

? (question mark) adds spaces for insignificant zeros on either side of the decimal point so that decimal points align when they are formatted with a fixed-width font, such as Courier New. ? can also be used for fractions that have varying numbers of digits.

To display

As

Use this code

1234.59

1234.6

####.#

8.9

8.900

#.000

.631

0.6

0.#

121234.568

12.01234.57

#.0#

44.398102.652.8

44.398102.65 2.8(with aligned decimals)

???.???

5.255.3

5 1/45 3/10(with aligned fractions)

# ???/???

Display a thousands separator

To display a comma as a thousands separator or to scale a number by a multiple of 1,000, include a comma in the number format.

To display

As

Use this code

12000

12,000

#,###

12000

12

#,

12200000

12.2

0.0,,

Specify colors

To set the text color for a section of the format, use the name of one of the following eight colors in square brackets in the section. The color code shall be the first item in the section.

[Black]

[Blue]

[Cyan]

[Green]

[Magenta]

[Red]

[White]

[Yellow]

Instead of using the name of the color, the color index can be used, like this [Color3] for Red. Numeric indexes for color are restircted to the range from 1 to 56, which reference by index to the legacy color palette.

[Note: the default legacy color palette values are listed in §18.8.27. In the format codes, [Color1] refers to the color associated with indexed="8", or black (by default), [Color2] refers to the color associated with indexed="9", or white (by default), and so on up to [Color56] referring to the color associated with indexed="63". If the color palette has been customized from default values, then the colors associated with these indexes will reflect those customizations.

Specify conditions

To set number formats that are applied only if a number meets a specified condition, enclose the condition in square brackets. The condition consists of a comparison operator and a value. Comparison operators include: = Equal to; > Greater than; < Less than; >= Greater than or equal to, <= Less than or equal to, and <> Not equal to. [Example: The following format displays numbers that are less than or equal to a red font and numbers that are greater than a blue font.

[Red][<=100];[Blue][>100]  

end example]

If the cell value does not meet any of the criteria, then pound signs ("#") are displayed across the width of the cell.

Currency, percentages, and scientific notation

Include currency symbols

To include currency symbols, place the currency symbol in the location it should when displayed.

Display percentages

To display numbers as a percentage of 100 — [Example: To display .08 as 8% or 2.8 as 280% end example]— include the percent sign (%) in the number format.

Display scientific notations

To display numbers in scientific format, use exponent codes in a section — [Example: E-, E+, e-, or e+. end example]

If a format contains a zero (0) or number sign (#) to the right of an exponent code, the application displays the number in scientific format and inserts an "E" or "e". The number of zeros or number signs to the right of a code determines the number of digits in the exponent. "E-" or "e-" places a minus sign by negative exponents. "E+" or "e+" places a minus sign by negative exponents and a plus sign by positive exponents.

Dates and times

Display days, months, and years

To display

As

Use this code

Months

1–12

m

Months

01–12

mm

Months

Jan–Dec

mmm

Months

January–December

mmmm

Months

J–D

mmmmm

Days

1–31

d

Days

01–31

dd

Days

Sun–Sat

ddd

Days

Sunday–Saturday

dddd

Years

00–99

yy

Years

date-base minimum value –9999

yyyy

See §18.17.4.1 for detail on possible date bases.

Month versus minutes

If "m" or "mm" code is used immediately after the "h" or "hh" code (for hours) or immediately before the "ss" code (for seconds), the application shall display minutes instead of the month.

Display hours, minutes, and seconds

To display

As

Use this code

Hours

0–23

h

Hours

00–23

hh

Minutes

0–59

m

Minutes

00–59

mm

Seconds

0–59

s

Seconds

00–59

ss

Time

h AM/PM

Time

h:mm AM/PM

Time

4:36:03 P

h:mm:ss A/P

Time

4:36:03.75

h:mm:ss.00

Elapsed time (hours and minutes)

1:02

[h]:mm

Elapsed time (minutes and seconds)

62:16

[mm]:ss

Elapsed time (seconds and hundredths)

3735.80

[ss].00

Minutes versus month

The "m" or "mm" code shall appear immediately after the "h" or "hh" code or immediately before the "ss" code; otherwise, these will display as the month instead of minutes.

AM and PM

If the format contains AM or PM, the hour is based on the 12-hour clock, where "AM" or "A" indicates times from until and "PM" or "P" indicates times from until midnight. Otherwise, the hour is based on the 24-hour clock.

Illegal date and time values

Cells formatted with a date or time format and which contain date or time values which do not meet the requirements specified shall show the pound sign ("#") across the width of the cell.

International Considerations

Format Code

Description

r

ja-jp/zh-tw only.

When loading in ja-jp locale, code becomes "ee".

When loading in zh-tw locale, code becomes "e".

rr

ja-jp/zh-tw only.

When loading in ja-jp locale, code becomes "gggee".

When loading in zh-tw locale, code becomes "e".

g

When loading in ja-jp locale: Single Roman character emperor reign

When loading in zh-tw (Taiwan only) locale: treat same as "gg".

gg

When loading in ja-jp locale: Single Kanji character emperor reign

When loading in zh-tw locale: Last era short name (since 1911)

ggg

When loading in ja-jp locale: Tow Kanji character emperor reign

When loading in zh-tw locale: Last era long name (since 1911)

e

When loading in ja-jp locale: Era year

When lading in zh-tw (Taiwan only) locale: Era year since 1912. If preceded by “g”, “gg”, or “ggg” then year of 1912, and years before 1912 are special, otherwise years before 1912 are Gregorian.

OTHER locales: becomes "yyyy"

ee

When loading in ja-jp locale: Era year w/ leading zero

When loading in zh-tw (Taiwan only) locale: Era year since 1911

OTHER locales: becomes "yy"

b2

Hijri calander

b1

Gregorian calendar

[$USD-409]

Specifies currency and locale/date system/number system information.

Syntax is [$<Currency String>-<language info>]. Currency string is a string to use as a currency symbol. Language info is a 32-bit value entered in hexidecimal format.

Language info format (byte 3 is most significant byte):

Bytes 0,1: 16-bit Language ID (LID).

Byte 2: Calendar type. High bit indicates that input is parsed using specified calendar.

Byte 3: Number system type. High bit indicates that input is parsed using specified number system.

Special language info values:

0xf800: System long date format

0xf400: System time format

Parent Elements
styleSheet (§18.8.39)

Child Elements	Subclause
numFmt (Number Format)	§18.8.30

Attributes	Description
count (Number Format Count)	Count of number format elements. The possible values for this attribute are defined by the W3C XML Schema unsignedInt datatype.

[Note: The W3C XML Schema definition of this element’s content model (CT_NumFmts) is located in §A.2. end note]

� ISO/IEC29500: 2008.

Constructors

NumberingFormats()	Initializes a new instance of the NumberingFormats class.
NumberingFormats(IEnumerable<OpenXmlElement>)	Initializes a new instance of the NumberingFormats class with the specified child elements.
NumberingFormats(OpenXmlElement[])	Initializes a new instance of the NumberingFormats class with the specified child elements.
NumberingFormats(String)	Initializes a new instance of the NumberingFormats class from outer XML.

Properties

ChildElements	Gets all the child nodes of the current element. (Inherited from OpenXmlElement)
Count	Number Format Count Represents the following attribute in the schema: count
ExtendedAttributes	Gets all extended attributes (attributes not defined in the schema) of the current element. (Inherited from OpenXmlElement)
Features	Gets a IFeatureCollection for the current element. This feature collection will be read-only, but will inherit features from its parent part and package if available. (Inherited from OpenXmlElement)
FirstChild	Gets the first child of the current OpenXmlElement element. (Inherited from OpenXmlCompositeElement)
HasAttributes	Gets a value indicating whether the current element has any attributes. (Inherited from OpenXmlElement)
HasChildren	Gets a value that indicates whether the current element has any child elements. (Inherited from OpenXmlCompositeElement)
InnerText	Gets or sets the concatenated values of the current node and all of its children. (Inherited from OpenXmlCompositeElement)
InnerXml	Gets or sets the markup that represents only the child nodes of the current node. (Inherited from OpenXmlCompositeElement)
LastChild	Gets the last child of the current OpenXmlElement element. Returns null (Nothing in Visual Basic) if there is no such OpenXmlElement element. (Inherited from OpenXmlCompositeElement)
LocalName
LocalName	Gets the local name of the current element. (Inherited from OpenXmlElement)
MCAttributes	Gets or sets the markup compatibility attributes. Returns null if no markup compatibility attributes are defined for the current element. (Inherited from OpenXmlElement)
NamespaceDeclarations	Gets all the namespace declarations defined in the current element. Returns an empty enumerator if there is no namespace declaration. (Inherited from OpenXmlElement)
NamespaceUri	Gets the namespace URI of the current element. (Inherited from OpenXmlElement)
OpenXmlElementContext	Gets the OpenXmlElementContext of the current element. (Inherited from OpenXmlElement)
OuterXml	Gets the markup that represents the current element and all of its child elements. (Inherited from OpenXmlElement)
Parent	Gets the parent element of the current element. (Inherited from OpenXmlElement)
Prefix	Gets the namespace prefix of current element. (Inherited from OpenXmlElement)
XmlQualifiedName	Gets the qualified name of the current element. (Inherited from OpenXmlElement)
XName	Gets the qualified name of the current element. (Inherited from OpenXmlElement)

Methods

AddAnnotation(Object)	Adds an object to the current OpenXmlElement element's list of annotations. (Inherited from OpenXmlElement)
AddChild(OpenXmlElement, Boolean)	Adds the specified element to the element if it is a known child. This adds the element in the correct location according to the schema. (Inherited from OpenXmlCompositeElement)
AddNamespaceDeclaration(String, String)	Adds a namespace declaration to the current node. (Inherited from OpenXmlElement)
Ancestors()	Enumerates all of the current element's ancestors. (Inherited from OpenXmlElement)
Ancestors<T>()	Enumerates only the current element's ancestors that have the specified type. (Inherited from OpenXmlElement)
Annotation(Type)	Get the first annotation object of the specified type from the current OpenXmlElement element. (Inherited from OpenXmlElement)
Annotation<T>()	Get the first annotation object of the specified type from the current OpenXmlElement element. (Inherited from OpenXmlElement)
Annotations(Type)	Gets a collection of annotations with the specified type for the current OpenXmlElement element. (Inherited from OpenXmlElement)
Annotations<T>()	Gets a collection of annotations with the specified type for the current OpenXmlElement element. (Inherited from OpenXmlElement)
Append(IEnumerable<OpenXmlElement>)	Appends each element from a list of elements to the end of the current element's list of child elements. (Inherited from OpenXmlElement)
Append(OpenXmlElement[])	Appends each element from an array of elements to the end of the current element's list of child elements. (Inherited from OpenXmlElement)
AppendChild<T>(T)	Appends the specified element to the end of the current element's list of child nodes. (Inherited from OpenXmlCompositeElement)
ClearAllAttributes()	Clears all of the attributes, including both known attributes and extended attributes. (Inherited from OpenXmlElement)
Clone()	Creates a duplicate of the current node. (Inherited from OpenXmlElement)
CloneNode(Boolean)	Creates a duplicate of this node.
Descendants()	Enumerates all of the current element's descendants. (Inherited from OpenXmlElement)
Descendants<T>()	Enumerate all of the current element's descendants of type T. (Inherited from OpenXmlElement)
Elements()	Enumerates all of the current element's children. (Inherited from OpenXmlElement)
Elements<T>()	Enumerates only the current element's children that have the specified type. (Inherited from OpenXmlElement)
ElementsAfter()	Enumerates all of the sibling elements that follow the current element and have the same parent as the current element. (Inherited from OpenXmlElement)
ElementsBefore()	Enumerates all of the sibling elements that precede the current element and have the same parent as the current element. (Inherited from OpenXmlElement)
GetAttribute(String, String)	Gets an Open XML attribute with the specified tag name and namespace URI. (Inherited from OpenXmlElement)
GetAttributes()	Gets a list that contains a copy of all the attributes. (Inherited from OpenXmlElement)
GetEnumerator()	Returns an enumerator that iterates through the child collection. (Inherited from OpenXmlElement)
GetFirstChild<T>()	Finds the first child element in type T. (Inherited from OpenXmlElement)
InsertAfter<T>(T, OpenXmlElement)	Inserts the specified element immediately after the specified reference element. (Inherited from OpenXmlCompositeElement)
InsertAfterSelf<T>(T)	Inserts the specified element immediately after the current element. (Inherited from OpenXmlElement)
InsertAt<T>(T, Int32)	Inserts the specified element at the specified index of the current element's children. (Inherited from OpenXmlCompositeElement)
InsertBefore<T>(T, OpenXmlElement)	Inserts the specified element immediately before the specified reference element. (Inherited from OpenXmlCompositeElement)
InsertBeforeSelf<T>(T)	Inserts the specified element immediately before the current element. (Inherited from OpenXmlElement)
IsAfter(OpenXmlElement)	Determines if the current element appears after a specified element in document order. (Inherited from OpenXmlElement)
IsBefore(OpenXmlElement)	Determines if the current element appears before a specified element in document order. (Inherited from OpenXmlElement)
LookupNamespace(String)	Resolves the namespace prefix in the context of the current node. (Inherited from OpenXmlElement)
LookupPrefix(String)	Finds the corresponding prefix for a namespace uri in the current element scope. (Inherited from OpenXmlElement)
NextSibling()	Gets the OpenXmlElement element that immediately follows the current OpenXmlElement element. Returns null (Nothing in Visual Basic) if there is no next OpenXmlElement element. (Inherited from OpenXmlElement)
NextSibling<T>()	Gets the OpenXmlElement element with the specified type that follows the current OpenXmlElement element. Returns null (Nothing in Visual Basic) if there is no next OpenXmlElement. (Inherited from OpenXmlElement)
PrependChild<T>(T)	Inserts the specified element at the beginning of the current element's list of child nodes. (Inherited from OpenXmlCompositeElement)
PreviousSibling()	Gets the OpenXmlElement element that immediately precedes the current OpenXmlElement element. Returns null (Nothing in Visual Basic ) if there is no preceding OpenXmlElement element. (Inherited from OpenXmlElement)
PreviousSibling<T>()	Gets the OpenXmlElement element with the specified type that precedes the current OpenXmlElement. Returns null (Nothing in Visual Basic) if there is no preceding OpenXmlElement element. (Inherited from OpenXmlElement)
Remove()	Removes the current element from its parent. (Inherited from OpenXmlElement)
RemoveAllChildren()	Removes all of the current element's child elements. (Inherited from OpenXmlCompositeElement)
RemoveAllChildren<T>()	Remove all of the current element's child elements that are of type T. (Inherited from OpenXmlElement)
RemoveAnnotations(Type)	Removes the annotations of the specified type from the current OpenXmlElement element. (Inherited from OpenXmlElement)
RemoveAnnotations<T>()	Removes the annotations with the specified type from the current OpenXmlElement element. (Inherited from OpenXmlElement)
RemoveAttribute(String, String)	Removes the attribute from the current element. (Inherited from OpenXmlElement)
RemoveChild<T>(T)	Removes the specified child element. (Inherited from OpenXmlCompositeElement)
RemoveNamespaceDeclaration(String)	Removes the namespace declaration for the specified prefix. Removes nothing if there is no prefix. (Inherited from OpenXmlElement)
ReplaceChild<T>(OpenXmlElement, T)	Replaces one of the current element's child elements with another OpenXmlElement element. (Inherited from OpenXmlCompositeElement)
SetAttribute(OpenXmlAttribute)	Sets an attribute to the specified element. If the attribute is a known attribute, the value of the attribute is set. If the attribute is an extended attribute, the 'openxmlAttribute' is added to the extended attributes list. (Inherited from OpenXmlElement)
SetAttributes(IEnumerable<OpenXmlAttribute>)	Sets a number of attributes to the element. If an attribute is a known attribute, the value of the attribute is set. If an attribute is an extended attribute, the 'openxmlAttribute' is added to the extended attributes list. (Inherited from OpenXmlElement)
WriteTo(XmlWriter)	Saves the current node to the specified XmlWriter. (Inherited from OpenXmlElement)

Explicit Interface Implementations

IEnumerable.GetEnumerator()	(Inherited from OpenXmlElement)
IEnumerable<OpenXmlElement>.GetEnumerator()	Returns an enumerator that iterates through the child collection. (Inherited from OpenXmlElement)

Applies to