Export (0) Print
Expand All

TI OMAP4470 Development Kit (Compact 2013)

10/16/2014

Windows Embedded Compact 2013 includes a board support package (BSP) for the TI OMAP4470 Blaze Tablet2 Development Platform, which uses a dual-core ARM Cortex A9 MP core with Symmetric Multiprocessing. When you install Platform Builder for Windows Embedded Compact 2013 with support for ARM processors, Platform Builder creates the following folder: %_WINCEROOT%\Platform\TI_SDP44XX.

This folder contains the Platform.bib file and other configuration files, the catalog items for the BSP, and source code for the boot loader, drivers, kernel independent transport layer (KITL), and OEM adaptation layer (OAL).

The following table describes the TI OMAP4470 Blaze Tablet2 Development Platform board support package (BSP) included in Platform Builder for Windows Embedded Compact 2013.

BSP

TI OMAP4470 Blaze Tablet2 Development Platform

CPU

OMAP4470

Kernel to use

ARMv7

Manufacturer

Texas Instruments

Part number

TEVM4470

Ordering information

Contact Texas Instruments or SVTronics

Floating-point unit

Yes (DSP)

Instruction set

ARMv7

Name in Platform Builder

TI_SDP44XX

Sample code directory

%_WINCEROOT%\Platform\TI_SDP44XX

BSP usage information

TI OMAP4470 Development Kit

The following table lists the features available in the TI OMAP4470 Blaze Tablet2 Development Platform BSP. For more information about hardware and software limitations for this platform, see the release notes that came with the development kit.

Hardware component

Specifications

BSP Support

Core Logic

OMAP4470

1.5GHz OMAP4470 applications processor

Yes

TWL6040

TWL6041 audio IC

Yes

TWL6032

TWL6032 power management integrated circuit (IC) with TPS62361 SMPS (switch-mode power supply)

Yes

Memory

EMMC

32-GB eMMC v4.41 Flash memory

Yes

LPDDR

1 GB low-power, dual-channel, double data rate memory

Yes

Display/Video

LCD Display

10.1" WXGA (1280 x 800) LCD with Capacitive touchscreen

Yes

HDMI

HDMI v1.3 output (supports full 1080p resolution)

Video Jack

Audio in-out/video jack (3.5-mm connector)

Display Port

One standard v1.1a DisplayPort connector

User Interface

Touch Screen

  • Projected Capacitive Touch (PCT) sensor
  • Multi-touch capable touch screen controller

Yes

Buttons

  • One recessed, externally operable reset button
  • One power on/off button
  • Three navigation buttons

Yes

Switches

  • One lock switch
  • One battery mode switch

Vibration motors

Two unbalanced mass vibration motors

Serial Interface

USB OTG

One High-Speed USB On-The-Go (HS USB 2.0 OTG) port

Dn167241.note(en-us,WinEmbedded.80).gifImportant:
If you connect a USB hub to this port, the hub must have an external power supply.

Yes

USB 2.0

Two High-Speed USB 2.0 host ports

No

Removable Media

SD/MMC

  • One full size 8-bit SD/MMC external connector
  • One full size SD/SDIO internal connector

Yes

SIM Card

One SIM card connector for modem support

Audio

Audio Jack

One 3.5 mm stereo headset jack for audio output and MIC input

Yes

Digital Microphone

Four digital microphone inputs

Speakers

Two 1W RMS speakers

Yes

FM Radio Support

FM transmit/receive

Expansion

COM

One COM connector for connectivity modules

miniPCIe

One full miniPCIe connector for optional modem modules

Wireless Connectivity

Wi-Fi

WLAN (802.11a/b/g/n)

Yes

Wireless Chipset

Single-chip WiLink 7.0 combination solution

Yes

Bluetooth

Bluetooth wireless technology

GPS

GPS Support

Modem

Wide Area Network

Industry-standard mini-PCIe modem connector capable of supporting LTE or 3G modems with integrated multi-band primary and diversity UMTS antennas

Sensors

Accelerometer

3-axis accelerometer sensor

Pressure

Pressure (barometric) sensor

Compass

Digital compass sensor

Ambient Light

Ambient light sensor

Temperature

Temperature sensor

Proximity

Proximity sensor

Camera

External Camera Port

5MP, 8MP and 12MP camera modules kits are available as accessories. Grooved frame to allow for external camera module(s) attachment.

Yes

Debug

RJ-45

One 802.3 (wired) Ethernet port (RJ-45 connector)

Yes

MIPI Debug

One MIPI test and debug connector (accessible only by removing the back cover)

Debug UART

One USB connector, which has serial UART data

Yes

Power

Wall Power

One standard 5V input for wall power

Yes

USB Power

Support for USB power

Yes

Battery

4100 mAh single-cell Lithium-Ion battery

Yes

Dn167241.note(en-us,WinEmbedded.80).gifNote:
There is a difference between TI/ARM and x86 systems during start-up. On TI/ARM processors the FTP server is loaded during boot-up, however, on x86 the FTP server is not. On the TI_3730 and TI_4470 the FTP server can be started directly by ftp://<ipaddress>. On x86 targets, the user must fire an IOCTL to start the FTP server.
Show:
© 2014 Microsoft