Export (0) Print
Expand All

FuelCell: What's My Motivation

Discusses the implementation of user control for the avatar (known as the fuel carrier).

The main points of this topic are:

The Complete Sample

The code in this tutorial illustrates the technique described in the text. A complete code sample for this tutorial is available for you to download, including full source code and any additional supporting files required by the sample.

Dd254737.note(en-us,XNAGameStudio.41).gifNote
You must download the above sample code in order to access the 3D models used in this tutorial step.

Overview

The goal for this part is the implementation of a control schema for the fuel carrier. With this schema, the player can use either the keyboard (A or D for left/right rotation and W and S for forward/backward movement) or a standard gamepad (using the left thumbstick for rotation and forward/backward movement). In addition, we'll check the _maxRange data member against the current position, and only allow movement that keeps the player on the playing field. This prevents the player from driving off the playing field.

GamePad States

In order to control the fuel carrier, you need input from a keyboard or gamepad. There are two approaches to getting input from the player: single-state and two-state. In a single-state approach, input is determined from a single snapshot of the controller, taken during execution of the Update method. Any actions that need to be taken by the game are initiated, thus enabling game play to move forward. This approach is demonstrated by detect a button press.

However, when discrete input is required, the single-state approach doesn't solve the problem. For instance, suppose a game is designed to fire one bullet for every press of a key or button. If you use the single-state approach, multiple bullets are fired per key or button press. This happens because human reflexes are slower than the standard update cycle of the game. Even a very quick player is going to have a key or button pressed for at least a few update cycles (unless the game uses a fixed-step approach). In order to fire a single bullet every time a key or button is pressed, you must look for a current state where a specific key or button is released and a previous state where that same key or button was pressed. This condition is only satisfied at the instant when the key or button transitions from pressed to released.

Hence, the two-state approach: tracking the current state of the controller and the previous state of the controller. This allows the game to determine single occurrences of player action, such as a key or button press. With this approach, it doesn't matter how slow (or fast) the player's reflexes are. The input is only valid at that moment when the previous and current input states match the criteria determined by the input code. This approach is demonstrated by Detecting an Xbox 360 Controller Button Press in the Current Frame (Xbox 360, Windows) and Detecting a Key Press (Windows, Windows Phone, Xbox 360).

It turns out that if you do any amount of XNA Game Studio game development, you often run into this controller update issue. The two-state approach is the best solution in most situations, and it is easy to implement. That same code also fulfills the needs of a single-state approach. In terms of keyboard and gamepad controls, FuelCell uses a two-state approach, but with a twist. The support for two-state input checking is in the code but FuelCell needs only check for current key and thumbstick states. Therefore, there is no need to check for a discrete event.

This code is an example of "future-proofing." If you were to add the capability to blow up a barrier with a missile, you would already have the necessary code to use the two-state approach.

Implementation begins in the FuelCellGame.cs file. Add the following code after the declaration of the graphics data member:

KeyboardState lastKeyboardState = new KeyboardState();
KeyboardState currentKeyboardState = new KeyboardState();
GamePadState lastGamePadState = new GamePadState();
GamePadState currentGamePadState = new GamePadState();

Now, in the existing Update method, initialize the variables at the beginning of the method:

lastKeyboardState = currentKeyboardState;
currentKeyboardState = Keyboard.GetState();
lastGamePadState = currentGamePadState;
currentGamePadState = GamePad.GetState(PlayerIndex.One);

You can now use either set of variables to determine exactly when a key or button is pressed or just use currentGamePadState if you only need the current position of the thumbstick. Your next step is to use this input to update the position and direction of the fuel carrier.

Updating the Fuel Carrier

Currently, the FuelCarrier class doesn't have a method for updating its position and heading. You'll add that method now and modify the main Update method to call it.

Staying within the FuelCellGame.Update function, replace this code:

float rotation = 0.0f;
Vector3 position = Vector3.Zero;
gameCamera.Update(rotation, position, 
    GraphicsDevice.Viewport.AspectRatio);

with the following:

fuelCarrier.Update(currentGamePadState, 
    currentKeyboardState, barriers);
float aspectRatio = graphics.GraphicsDevice.Viewport.AspectRatio;
gameCamera.Update(fuelCarrier.ForwardDirection, 
    fuelCarrier.Position, aspectRatio);

The only difference is a call to the new update method, FuelCarrier.Update. This method takes as input the current keyboard and gamepad states and the barriers array. The method determines if the ship can move based on the current input and barrier locations. Ignore the barriers parameter for now; it is used in a later step. At this point, the function only prevents the vehicle from driving off the playing field. If an attempt is made to go over the playing field edge, the input is ignored.

Replace the code that checks for a Back button press with the following:

// Allows the game to exit
if ((currentKeyboardState.IsKeyDown(Keys.Escape)) || 
    (currentGamePadState.Buttons.Back == ButtonState.Pressed))
    this.Exit();

The game now checks for both keyboard (ESC key) and gamepad input (Back button) when the player wishes to exit the game.

In the GameObject.cs file, locate your FuelCarrier class, and add the new update method:

public void Update(GamePadState gamepadState, 
    KeyboardState keyboardState, Barrier[] barriers)
{
    Vector3 futurePosition = Position;
    float turnAmount = 0;

    if (keyboardState.IsKeyDown(Keys.A))
    {
        turnAmount = 1;
    }
    else if(keyboardState.IsKeyDown(Keys.D))
    {
        turnAmount = -1;
    }
    else if(gamepadState.ThumbSticks.Left.X != 0)
    {
        turnAmount = -gamepadState.ThumbSticks.Left.X;
    }
    ForwardDirection += turnAmount * GameConstants.TurnSpeed;
    Matrix orientationMatrix = Matrix.CreateRotationY(ForwardDirection);

    Vector3 movement = Vector3.Zero;
    if (keyboardState.IsKeyDown(Keys.W))
    {
        movement.Z = 1;
    }
    else if(keyboardState.IsKeyDown(Keys.S))
    {
        movement.Z = -1;
    }
    else if (gamepadState.ThumbSticks.Left.Y != 0)
    {
        movement.Z = gamepadState.ThumbSticks.Left.Y;
    }

    Vector3 speed = Vector3.Transform(movement, orientationMatrix);
    speed *= GameConstants.Velocity;
    futurePosition = Position + speed;

    if (ValidateMovement(futurePosition, barriers))
    {
        Position = futurePosition;
    }
}

This method is important, so let's go through it in detail. First, the future position is set to the current position and the turn amount is set to 0. The amount of vehicle rotation is calculated, based on the current state of the A and D keys or the X-axis of the left thumbstick, and a rotation matrix is created. This matrix is later used to rotate the vehicle the proper amount in world coordinates. The second chunk of code calculates how far the ship moved in either a forward or backward direction, based on the current state of the W and S keys or the Y-axis of the same thumbstick. This distance is then transformed using the rotational matrix created earlier, and this result is multiplied by a constant velocity (GameConstants.Velocity). The final result is then added to the current position, resulting in a projected future position. Finally, this result is passed to a private method called ValidateMovement. If it is valid, the _position member is updated and control returns to the main Game1.Update method.

Programming Tip

You might be wondering why you couldn't just test the current position for validity instead of calculating a future position and testing that. The answer is that if you only tested the current position, it's already too late to prevent illegal movement. When the test is made, the vehicle has already had its position updated. Suppose that new position is illegal (past the edge of a boundary case). This causes further tests to fail, resulting in the vehicle "sticking" to the current positon. Obviously, this is not optimal behavior for a player-controlled vehicle.

It is better to check the future position and prevent any illegal moves. This check allows the player to attempt something different (like backing up), and not get stuck because the player currently is in a legal position.

The remaining piece is the implementation of the ValidateMovement method. Add the following method after the FuelCarrier.Update method:

private bool ValidateMovement(Vector3 futurePosition, 
    Barrier[] barriers)
{
    //Don't allow off-terrain driving
    if ((Math.Abs(futurePosition.X) > MaxRange) || 
        (Math.Abs(futurePosition.Z) > MaxRange))
        return false;

    return true;
}

Currently, this method only checks for the edge of the playing field. Any attempt to drive off the playing field is ignored.

After the usual drill of rebuilding the project and running it, drive the fuel carrier freely around the map. Test out the boundary code by driving to the edge of the playing field. You'll notice that you stop moving until you choose a new direction. The control schema implementation was pretty easy but, coming up, the game really starts to come together... which requires a lot of coding!

Community Additions

ADD
Show:
© 2014 Microsoft