Driver Test Manager
iSCSI Digest - Tape (Target)

Expand all contracted text  Show All

Bb931768.dfw-logo(en-us,MSDN.10).gif


Type: Automated Test

Overview

The iSCSI Digest - Tape (Target) test verifies that an iSCSI tape/media changer target supports header and data digests as negotiated during the logon phase.

Details

The iSCSI Digest - Tape (Target) test performs the following algorithm:
  1. Prepare the system for iSCSI operations:
    1. If the target that you are testing is already logged on, the session information is saved so the session can be restored later.
    2. The target tape device is added as a static iSCSI target. 
  3. Perform iSCSI operations:
    1. If target that you are testing is already logged on, the current session to the target is logged out.
    2. The target is logged on by using the Microsoft iSCSI Initiator with header digests enabled.
    3. After logging on to the target, the test waits for the tape device to be enumerated by the test system.
    4. The test will perform tape I/O operations by using the current target session.
    5. The test repeats the preceding steps with data digests only enabled and header and data digests enabled.
    6. The target under test must permit logon by using all three digest combinations and no I/O failures can be detected during I/O operations.
  5. Restore any previous iSCSI target sessions.

Run Time: 
Log File: 
System Restart Required: No
Test Category: 
Supported operating systems for "DFW" logo testing:
Windows Vista
Program: 

Requirements

Software Requirements

The test tool runs on the following Windows operating systems:
  • Windows Vista
  • Windows Server 2003
  • Windows XP
  • Software components included with the device that is being tested.
  • On Windows XP and Windows Server 2003, the latest version of the Microsoft iSCSI software initiator is needed.

Supported Software

Hardware Requirements

  • Device to be tested
  • Computer that meets the minimum software requirements
  • Windows keyboard
  • Two-button pointing device
  • Color display monitor capable of at least 1024 by 768 resolution, 32-bits per pixel, 60 Hz
  • Hard drive with a minimum of 20 GB available on partition C:
  • x86
  • x64
  • Itanium
  • Computer that meets the minimum software requirements
  • Windows keyboard
  • Two-button pointing device
  • Color display monitor capable of at least 1024 by 768 resolution, 32-bits per pixel, 60 Hz
  • Hard drive with a minimum of 20 GB available on partition C:
  • x86
  • x64
  • Itanium
  • Windows keyboard
  • Two-button pointing device
  • Color display monitor capable of at least 1024 by 768 resolution, 32-bits per pixel, 60 Hz
  • Hard drive with a minimum of 20 GB available on partition C:
  • x86
  • x64
  • Itanium
  • Two-button pointing device
  • Color display monitor capable of at least 1024 by 768 resolution, 32-bits per pixel, 60 Hz
  • Hard drive with a minimum of 20 GB available on partition C:
  • x86
  • x64
  • Itanium
  • Color display monitor capable of at least 1024 by 768 resolution, 32-bits per pixel, 60 Hz
  • Hard drive with a minimum of 20 GB available on partition C:
  • x86
  • x64
  • Itanium
  • Hard drive with a minimum of 20 GB available on partition C:
  • x86
  • x64
  • Itanium

  • Processor

  • x86
  • x64
  • Itanium
  • x64
  • Itanium
  • Itanium

Running iSCSI Digest - Tape (Target)

  1. Log on to the tape target and format the target.
  2. Run the test as a DTM job.
  3. Enter the required data in the configuration dialog box that appears when this job is scheduled.

Command Syntax

Command optionDescription

Cautions

Troubleshooting

  1. Look at the job results log file for test failures
  2. Verify the iSCSI configuration information is entered correctly in the configuration dialog box when the job is scheduled from Device Console.


Reference Documentation

Code Tour

File Manifest

FileLocation
iscsi_digest.exe…\tests\%ARCHITECTURE%\nttest\driverstest\storage\wdk\iscsi

Test Assertions

Test Assertions



1.1 Setting up test, and saving open sessions.
Test Assertion GUID: 0df19e9d-c42e-11da-94f4-00123f3a6b60

Windows Logo Program: STORAGE-0001 Storage devices meet industry standards and Windows requirements

Additional Information: The setup stage must get the current sessions to the target and then persist that information so it can be used to reestablish these sessions during the cleanup stage.

2.1 The MS Initiator must be able to log into the target successfully with digests enabled
Test Assertion GUID: 7f102025-c42e-11da-94f4-00123f3a6b60

Windows Logo Program: STORAGE-0001 Storage devices meet industry standards and Windows requirements

Additional Information:

3.1 The MS Initiator must be able to successfully logout from target.
Test Assertion GUID: 7f102027-c42e-11da-94f4-00123f3a6b60

Windows Logo Program: STORAGE-0001 Storage devices meet industry standards and Windows requirements

Additional Information:

4.1 Cleaning up test, restoring sessions.
Test Assertion GUID: 7f102028-c42e-11da-94f4-00123f3a6b60

Windows Logo Program: STORAGE-0001 Storage devices meet industry standards and Windows requirements

Additional Information: The cleanup stage must restore the sessions that were persisted during the setup stage. 
Build machine: CAPEBUILD
Tags :


Page view tracker