WITH <common_table_expression>

Specifies the temporary named result set or view, also known as common table expression, defined within the scope of the MERGE statement. The result set is derived from a simple query and is referenced by the MERGE statement. For more information, see WITH common_table_expression (Transact-SQL).

TOP ( expression ) [ PERCENT ]

Specifies the number or percentage of rows that are affected. expression can be either a number or a percentage of the rows. The rows referenced in the TOP expression are not arranged in any order. For more information, see TOP (Transact-SQL).

The TOP clause is applied after the entire source table and the entire target table are joined and the joined rows that do not qualify for an insert, update, or delete action are removed. The TOP clause further reduces the number of joined rows to the specified value and the insert, update, or delete actions are applied to the remaining joined rows in an unordered fashion. That is, there is no order in which the rows are distributed among the actions defined in the WHEN clauses. For example, specifying TOP (10) affects 10 rows; of these rows, 7 may be updated and 3 inserted, or 1 may be deleted, 5 updated, and 4 inserted and so on.

Because the MERGE statement performs a full table scan of both the source and target tables, I/O performance can be affected when using the TOP clause to modify a large table by creating multiple batches. In this scenario, it is important to ensure that all successive batches target new rows. For more information, see Optimizing MERGE Statement Performance.

database_name

Is the name of the database in which target_table is located.

schema_name

Is the name of the schema to which target_table belongs.

target_table

Is the table or view against which the data rows from <table_source> are matched based on <clause_search_condition>. target_table is the target of any insert, update, or delete operations specified by the WHEN clauses of the MERGE statement.

If target_table is a view, any actions against it must satisfy the conditions for updating views. For more information, see Modifying Data Through a View.

target_table cannot be a remote table. target_table cannot have any rules defined on it.

[ AS ] table_alias

Is an alternative name used to reference a table.

USING <table_source>

Specifies the data source that is matched with the data rows in target_table based on <merge_search condition>. The result of this match dictates the actions to take by the WHEN clauses of the MERGE statement. <table_source> can be a remote table or a derived table that accesses remote tables.

<table_source> can be a derived table that uses the Transact-SQL table value constructor to construct a table by specifying multiple rows.

For more information about the syntax and arguments of this clause, see FROM (Transact-SQL).

ON <merge_search_condition>

Specifies the conditions on which <table_source> is joined with target_table to determine where they match.

Caution:

It is important to specify only the columns from the target table that are used for matching purposes. That is, specify columns from the target table that are compared to the corresponding column of the source table. Do not attempt to improve query performance by filtering out rows in the target table in the ON clause, such as by specifying AND NOT target_table.column_x = value. Doing so may return unexpected and incorrect results.

WHEN MATCHED THEN <merge_matched>

Specifies that all rows of target_table that match the rows returned by <table_source> ON <merge_search_condition>, and satisfy any additional search condition, are either updated or deleted according to the <merge_matched> clause.

The MERGE statement can have at most two WHEN MATCHED clauses. If two clauses are specified, then the first clause must be accompanied by an AND <search_condition> clause. For any given row, the second WHEN MATCHED clause is only applied if the first is not. If there are two WHEN MATCHED clauses, then one must specify an UPDATE action and one must specify a DELETE action. If UPDATE is specified in the <merge_matched> clause, and more than one row of <table_source>matches a row in target_table based on <merge_search_condition>, SQL Server returns an error. The MERGE statement cannot update the same row more than once, or update and delete the same row.

WHEN NOT MATCHED [ BY TARGET ] THEN <merge_not_matched>

Specifies that a row is inserted into target_table for every row returned by <table_source> ON <merge_search_condition> that does not match a row in target_table, but does satisfy an additional search condition, if present. The values to insert are specified by the <merge_not_matched> clause. The MERGE statement can have only one WHEN NOT MATCHED clause.

WHEN NOT MATCHED BY SOURCE THEN <merge_matched>

Specifies that all rows of target_table that do not match the rows returned by <table_source> ON <merge_search_condition>, and that satisfy any additional search condition, are either updated or deleted according to the <merge_matched> clause.

The MERGE statement can have at most two WHEN NOT MATCHED BY SOURCE clauses. If two clauses are specified, then the first clause must be accompanied by an AND <clause_search_condition> clause. For any given row, the second WHEN NOT MATCHED BY SOURCE clause is only applied if the first is not. If there are two WHEN NOT MATCHED BY SOURCE clauses, then one must specify an UPDATE action and one must specify a DELETE action. Only columns from the target table can be referenced in <clause_search_condition>.

When no rows are returned by <table_source>, columns in the source table cannot be accessed. If the update or delete action specified in the <merge_matched> clause references columns in the source table, error 207 (Invalid column name) is returned. For example, the clause WHEN NOT MATCHED BY SOURCE THEN UPDATE SET TargetTable.Col1 = SourceTable.Col1 may cause the statement to fail because Col1 in the source table is inaccessible.

AND <clause_search_condition>

Specifies any valid search condition. For more information, see Search Condition (Transact-SQL).

<table_hint_limited>

Specifies one or more table hints that are applied on the target table for each of the insert, update, or delete actions that are performed by the MERGE statement. The WITH keyword and the parentheses are required.

NOLOCK and READUNCOMMITTED are not allowed. For more information about table hints, see Table Hints (Transact-SQL).

Specifying the TABLOCK hint on a table that is the target of an INSERT statement has the same effect as specifying the TABLOCKX hint. An exclusive lock is taken on the table. When FORCESEEK is specified, it is applied to the implicit instance of the target table joined with the source table.

Caution:
Specifying READPAST with WHEN NOT MATCHED [ BY TARGET ] THEN INSERT may result in INSERT operations that violate UNIQUE constraints.

INDEX ( index_val [ ,...n ] )

Specifies the name or ID of one or more indexes on the target table for performing an implicit join with the source table. For more information, see Table Hints (Transact-SQL).

<output_clause>

Returns a row for every row in target_table that is updated, inserted, or deleted, in no particular order. For more information about the arguments of this clause, see OUTPUT Clause (Transact-SQL).

OPTION ( <query_hint> [ ,...n ] )

Specifies that optimizer hints are used to customize the way the Database Engine processes the statement. For more information, see Query Hints (Transact-SQL).

<merge_matched>

Specifies the update or delete action that is applied to all rows of target_table that do not match the rows returned by <table_source> ON <merge_search_condition>, and that satisfy any additional search condition.

UPDATE SET <set_clause>

Specifies the list of column or variable names to be updated in the target table and the values with which to update them.

For more information about the arguments of this clause, see UPDATE (Transact-SQL). Setting a variable to the same value as a column is not permitted.

DELETE

Specifies that the rows matching rows in target_table are deleted.

<merge_not_matched>

Specifies the values to insert into the target table.

( column_list )

Is a list of one or more columns of the target table in which to insert data. Columns must be specified as a single-part name or else the MERGE statement will fail. column_list must be enclosed in parentheses and delimited by commas.

VALUES ( values_list )

Is a comma-separated list of constants, variables, or expressions that return values to insert into the target table. Expressions cannot contain an EXECUTE statement.

DEFAULT VALUES

Forces the inserted row to contain the default values defined for each column.

For more information about this clause, see INSERT (Transact-SQL).

<search condition>

Specifies the search conditions used to specify <merge_search_condition> or <clause_search_condition>. For more information about the arguments for this clause, see Search Condition (Transact-SQL).

At least one of the three MATCHED clauses must be specified, but they can be specified in any order. A variable cannot be updated more than once in the same MATCHED clause.

Any insert, update, or delete actions specified on the target table by the MERGE statement are limited by any constraints defined on it, including any cascading referential integrity constraints. If IGNORE_DUP_KEY is set to ON for any unique indexes on the target table, MERGE ignores this setting.

The MERGE statement requires a semicolon (;) as a statement terminator. Error 10713 is raised when a MERGE statement is run without the terminator.

When used after MERGE, @@ROWCOUNT (Transact-SQL) returns the total number of rows inserted, updated, and deleted to the client.

MERGE is a fully reserved keyword when the database compatibility level is set to 100. The MERGE statement is available under both 90 and 100 database compatibility levels; however the keyword is not fully reserved when the database compatibility level is set to 90.

Trigger Implementation

Requires SELECT permission on the source table and INSERT, UPDATE, or DELETE permissions on the target table. For additional information, see the Permissions section in the SELECT, INSERT, UPDATE, and DELETE topics.

A. Using MERGE to perform INSERT and UPDATE operations on a table in a single statement

USE AdventureWorks;
GO
CREATE PROCEDURE dbo.InsertUnitMeasure
    @UnitMeasureCode nchar(3),
    @Name nvarchar(25)
AS 
BEGIN
    SET NOCOUNT ON;
-- Update the row if it exists.    
    UPDATE Production.UnitMeasure
	SET Name = @Name
	WHERE UnitMeasureCode = @UnitMeasureCode
-- Insert the row if the UPDATE statement failed.	
	IF (@@ROWCOUNT = 0 )
	BEGIN
	    INSERT INTO Production.UnitMeasure (UnitMeasureCode, Name)
	    VALUES (@UnitMeasureCode, @Name)
	END
END;
GO
-- Test the procedure and return the results.
EXEC InsertUnitMeasure @UnitMeasureCode = 'ABC', @Name = 'Test Value';
SELECT UnitMeasureCode, Name FROM Production.UnitMeasure
WHERE UnitMeasureCode = 'ABC';
GO

-- Rewrite the procedure to perform the same operations using the MERGE statement.
-- Create a temporary table to hold the updated or inserted values from the OUTPUT clause.
CREATE TABLE #MyTempTable
    (ExistingCode nchar(3),
     ExistingName nvarchar(50),
     ExistingDate datetime,
     ActionTaken nvarchar(10),
     NewCode nchar(3),
     NewName nvarchar(50),
     NewDate datetime
    );
GO
ALTER PROCEDURE dbo.InsertUnitMeasure
    @UnitMeasureCode nchar(3),
    @Name nvarchar(25)
AS 
BEGIN
    SET NOCOUNT ON;
           
    MERGE Production.UnitMeasure AS target
    USING (SELECT @UnitMeasureCode, @Name) AS source (UnitMeasureCode, Name)
    ON (target.UnitMeasureCode = source.UnitMeasureCode)
    WHEN MATCHED THEN 
        UPDATE SET Name = source.Name
	WHEN NOT MATCHED THEN	
	    INSERT (UnitMeasureCode, Name)
	    VALUES (source.UnitMeasureCode, source.Name)
	    OUTPUT deleted.*, $action, inserted.* INTO #MyTempTable;
END;
GO
-- Test the procedure and return the results.
EXEC InsertUnitMeasure @UnitMeasureCode = 'ABC', @Name = 'New Test Value';
EXEC InsertUnitMeasure @UnitMeasureCode = 'XYZ', @Name = 'Test Value';
EXEC InsertUnitMeasure @UnitMeasureCode = 'ABC', @Name = 'Another Test Value';

SELECT * FROM #MyTempTable;
-- Cleanup 
DELETE FROM Production.UnitMeasure WHERE UnitMeasureCode IN ('ABC','XYZ');
DROP TABLE #MyTempTable;
Go

B. Using MERGE to perform UPDATE and DELETE operations on a table in a single statement

USE AdventureWorks;
GO
IF OBJECT_ID (N'Production.usp_UpdateInventory', N'P') IS NOT NULL DROP PROCEDURE Production.usp_UpdateInventory;
GO
CREATE PROCEDURE Production.usp_UpdateInventory
    @OrderDate datetime
AS
MERGE Production.ProductInventory AS target
USING (SELECT ProductID, SUM(OrderQty) FROM Sales.SalesOrderDetail AS sod
    JOIN Sales.SalesOrderHeader AS soh
    ON sod.SalesOrderID = soh.SalesOrderID
    AND soh.OrderDate = @OrderDate
    GROUP BY ProductID) AS source (ProductID, OrderQty)
ON (target.ProductID = source.ProductID)
WHEN MATCHED AND target.Quantity - source.OrderQty <= 0
    THEN DELETE
WHEN MATCHED 
    THEN UPDATE SET target.Quantity = target.Quantity - source.OrderQty, 
                    target.ModifiedDate = GETDATE()
OUTPUT $action, Inserted.ProductID, Inserted.Quantity, Inserted.ModifiedDate, Deleted.ProductID,
    Deleted.Quantity, Deleted.ModifiedDate;
GO

EXECUTE Production.usp_UpdateInventory '20030501'

C. Using MERGE to perform UPDATE and INSERT operations on a target table by using a derived source table

USE AdventureWorks;
GO
-- Create a temporary table variable to hold the output actions.
DECLARE @SummaryOfChanges TABLE(Change VARCHAR(20));

MERGE INTO Sales.SalesReason AS Target
USING (VALUES ('Recommendation','Other'), ('Review', 'Marketing'), ('Internet', 'Promotion'))
       AS Source (NewName, NewReasonType)
ON Target.Name = Source.NewName
WHEN MATCHED THEN
	UPDATE SET ReasonType = Source.NewReasonType
WHEN NOT MATCHED BY TARGET THEN
	INSERT (Name, ReasonType) VALUES (NewName, NewReasonType)
OUTPUT $action INTO @SummaryOfChanges;

-- Query the results of the table variable.
SELECT Change, COUNT(*) AS CountPerChange
FROM @SummaryOfChanges
GROUP BY Change;

D. Inserting the results of the MERGE statement into another table

USE AdventureWorks;
GO
CREATE TABLE Production.UpdatedInventory
    (ProductID INT NOT NULL, LocationID int, NewQty int, PreviousQty int,
     CONSTRAINT PK_Inventory PRIMARY KEY CLUSTERED (ProductID, LocationID));
GO
INSERT INTO Production.UpdatedInventory
SELECT ProductID, LocationID, NewQty, PreviousQty 
FROM
(    MERGE Production.ProductInventory AS pi
     USING (SELECT ProductID, SUM(OrderQty) 
            FROM Sales.SalesOrderDetail AS sod
            JOIN Sales.SalesOrderHeader AS soh
            ON sod.SalesOrderID = soh.SalesOrderID
            AND soh.OrderDate BETWEEN '20030701' AND '20030731'
            GROUP BY ProductID) AS src (ProductID, OrderQty)
     ON pi.ProductID = src.ProductID
    WHEN MATCHED AND pi.Quantity - src.OrderQty >= 0 
        THEN UPDATE SET pi.Quantity = pi.Quantity - src.OrderQty
    WHEN MATCHED AND pi.Quantity - src.OrderQty <= 0 
        THEN DELETE
    OUTPUT $action, Inserted.ProductID, Inserted.LocationID, Inserted.Quantity AS NewQty, Deleted.Quantity AS PreviousQty)
 AS Changes (Action, ProductID, LocationID, NewQty, PreviousQty) WHERE Action = 'UPDATE';
GO

Reference

Other Resources

Help and Information