The WDF_DEVICE_PNP_CAPABILITIES structure describes a device's Plug and Play capabilities.

typedef struct _WDF_DEVICE_PNP_CAPABILITIES {
    ULONG Size;
    WDF_TRI_STATE LockSupported;
    WDF_TRI_STATE EjectSupported;
    WDF_TRI_STATE Removable;
    WDF_TRI_STATE DockDevice;
    WDF_TRI_STATE UniqueID;
    WDF_TRI_STATE SilentInstall;
    WDF_TRI_STATE SurpriseRemovalOK;
    WDF_TRI_STATE HardwareDisabled;
    WDF_TRI_STATE NoDisplayInUI;
    ULONG Address;
    ULONG UINumber;
} WDF_DEVICE_PNP_CAPABILITIES, *PWDF_DEVICE_PNP_CAPABILITIES;

Members

Size

The size, in bytes, of this structure.

LockSupported

A WDF_TRI_STATE-typed value that indicates, if set to WdfTrue, that the device can be locked in its slot to prevent ejection. (This capability disables ejecting a device from its slot, not ejecting media from a device.) For more information about WDF_TRI_STATE-typed values, see the following Comments section.

EjectSupported

A WDF_TRI_STATE-typed value that indicates, if set to WdfTrue, that the device can be ejected from its slot. (This capability enables ejecting a device from its slot, not ejecting media from a device.)

Removable

A WDF_TRI_STATE-typed value that indicates, if set to WdfTrue, that the device can be removed while the system is running. If Removable is set to WdfTrue and SurpriseRemovalOK is set to WdfFalse, users should use the system's Unplug or Eject Hardware program.

DockDevice

A WDF_TRI_STATE-typed value that indicates, if set to WdfTrue, that the device is a docking station.

UniqueID

A WDF_TRI_STATE-typed value that indicates, if set to WdfTrue, that the device's instance ID is unique to the entire system. If UniqueID is set to WdfFalse, the instance ID is unique only to the device's bus. For more information about instance IDs, see Device Identification Strings.

SilentInstall

A WDF_TRI_STATE-typed value that indicates, if set to WdfTrue, that Device Manager should not display dialog boxes during installation of the device.

SurpriseRemovalOK

A WDF_TRI_STATE-typed value that indicates, if set to WdfTrue (and if Removable is also set to WdfTrue), that users can remove the device without using the system's Unplug or Eject Hardware program.

HardwareDisabled

A WDF_TRI_STATE-typed value that indicates, if set to WdfTrue, that the device is disabled.

NoDisplayInUI

A WDF_TRI_STATE-typed value that indicates, if set to WdfTrue, that Device Manager should not display the device.

Address

An address that indicates where the device is located on its bus.

The interpretation of this number is bus-specific. If the address is unknown or the bus driver does not support an address, the bus driver leaves the Address member at its default value of 0xFFFFFFFF (-1).

The following list describes the information that certain bus drivers store in the Address member for their child devices:

1394

Does not supply an address because the addresses are volatile. Defaults to 0xFFFFFFFF.

EISA

Slot Number (0-F).

IDE

For an IDE device, the address contains the target ID and LUN. For an IDE channel, the address is 0 if the channel is the primary channel or 1 if the channel is the secondary channel).

ISApnp

Does not supply an address. Defaults to 0xFFFFFFFF.

PC Card (PCMCIA)

The socket number (typically 0x00 or 0x40).

PCI

The device number in the high word and the function number in the low word.

SCSI

The target ID.

USB

The port number.

UINumber

A number that is associated with the device and can be displayed in user interfaces. This number is typically a user-perceived slot number, such as a number printed next to the slot on the board or some other number that helps the user locate the device. If UINumber is unknown, or if supplying a number would not assist the user in identifying the device's location, the driver sets this value to -1.

Comments

Several members use the WDF_TRI_STATE type. For these members, a value of WdfTrue indicates that the device supports the capability and a value of WdfFalse indicates it does not. A value of WdfUseDefault indicates the framework will use the value that a driver lower in the stack provided. For example, if a bus driver specifies WdfTrue for LockSupported and the device's function driver specifies WdfUseDefault, the framework stores WdfTrue for the capability.

The WDF_DEVICE_PNP_CAPABILITIES structure is used as input to WdfDeviceSetPnpCapabilities.

To initialize a WDF_DEVICE_PNP_CAPABILITIES structure, a driver should call WDF_DEVICE_PNP_CAPABILITIES_INIT.

Requirements

Versions: The WDF_DEVICE_PNP_CAPABILITIES structure is available in version 1.0 and later versions of KMDF.

Headers: Declared in wdfdevice.h. Include wdf.h.

See Also

WdfDeviceSetPowerCapabilities WdfPdoInitAssignRawDevice