Export (0) Print
Expand All

WNetUseConnection function

The WNetUseConnection function makes a connection to a network resource. The function can redirect a local device to a network resource.

The WNetUseConnection function is similar to the WNetAddConnection3 function. The main difference is that WNetUseConnection can automatically select an unused local device to redirect to the network resource.

Syntax


DWORD WNetUseConnection(
  _In_     HWND hwndOwner,
  _In_     LPNETRESOURCE lpNetResource,
  _In_     LPCTSTR lpPassword,
  _In_     LPCTSTR lpUserID,
  _In_     DWORD dwFlags,
  _Out_    LPTSTR lpAccessName,
  _Inout_  LPDWORD lpBufferSize,
  _Out_    LPDWORD lpResult
);

Parameters

hwndOwner [in]

Handle to a window that the provider of network resources can use as an owner window for dialog boxes. Use this parameter if you set the CONNECT_INTERACTIVE value in the dwFlags parameter.

lpNetResource [in]

Pointer to a NETRESOURCE structure that specifies details of the proposed connection. The structure contains information about the network resource, the local device, and the network resource provider.

You must specify the following members of the NETRESOURCE structure.

MemberMeaning
dwType

Specifies the type of resource to connect to.

It is most efficient to specify a resource type in this member, such as RESOURCETYPE_DISK or RESOURCETYPE_PRINT. However, if the lpLocalName member is NULL, or if it points to an empty string and CONNECT_REDIRECT is not set, dwType can be RESOURCETYPE_ANY.

This method works only if the function does not automatically choose a device to redirect to the network resource.

Although this member is required, its information may be ignored by the network service provider.

lpLocalName

Pointer to a null-terminated string that specifies the name of a local device to be redirected, such as "F:" or "LPT1". The string is treated in a case-insensitive manner.

If the string is empty, or if lpLocalName is NULL, a connection to the network occurs without redirection.

If the CONNECT_REDIRECT value is set in the dwFlags parameter, or if the network requires a redirected local device, the function chooses a local device to redirect and returns the name of the device in the lpAccessName parameter.

lpRemoteName

Pointer to a null-terminated string that specifies the network resource to connect to. The string can be up to MAX_PATH characters in length, and it must follow the network provider's naming conventions.

lpProvider

Pointer to a null-terminated string that specifies the network provider to connect to. If lpProvider is NULL, or if it points to an empty string, the operating system attempts to determine the correct provider by parsing the string pointed to by the lpRemoteName member.

If this member is not NULL, the operating system attempts to make a connection only to the named network provider.

You should set this member only if you know the network provider you want to use. Otherwise, let the operating system determine which provider the network name maps to.

 

The WNetUseConnection function ignores the other members of the NETRESOURCE structure. For more information, see the descriptions following for the dwFlags parameter.

lpPassword [in]

Pointer to a constant null-terminated string that specifies a password to be used in making the network connection.

If lpPassword is NULL, the function uses the current default password associated with the user specified by lpUserID.

If lpPassword points to an empty string, the function does not use a password.

If the connection fails because of an invalid password and the CONNECT_INTERACTIVE value is set in the dwFlags parameter, the function displays a dialog box asking the user to type the password.

lpUserID [in]

Pointer to a constant null-terminated string that specifies a user name for making the connection.

If lpUserID is NULL, the function uses the default user name. (The user context for the process provides the default user name.)

The lpUserID parameter is specified when users want to connect to a network resource for which they have been assigned a user name or account other than the default user name or account.

The user-name string represents a security context. It may be specific to a network provider.

dwFlags [in]

Set of bit flags describing the connection. This parameter can be any combination of the following values.

ValueMeaning
CONNECT_INTERACTIVE

If this flag is set, the operating system may interact with the user for authentication purposes.

CONNECT_PROMPT

This flag instructs the system not to use any default settings for user names or passwords without offering the user the opportunity to supply an alternative. This flag is ignored unless CONNECT_INTERACTIVE is also set.

CONNECT_REDIRECT

This flag forces the redirection of a local device when making the connection.

If the lpLocalName member of NETRESOURCE specifies a local device to redirect, this flag has no effect, because the operating system still attempts to redirect the specified device. When the operating system automatically chooses a local device, the dwType member must not be equal to RESOURCETYPE_ANY.

If this flag is not set, a local device is automatically chosen for redirection only if the network requires a local device to be redirected.

Windows XP:  When the system automatically assigns network drive letters, letters are assigned beginning with Z:, then Y:, and ending with C:. This reduces collision between per-logon drive letters (such as network drive letters) and global drive letters (such as disk drives). Note that previous releases assigned drive letters beginning with C: and ending with Z:.

CONNECT_UPDATE_PROFILE

This flag instructs the operating system to store the network resource connection.

If this bit flag is set, the operating system automatically attempts to restore the connection when the user logs on. The system remembers only successful connections that redirect local devices. It does not remember connections that are unsuccessful or deviceless connections. (A deviceless connection occurs when lpLocalName is NULL or when it points to an empty string.)

If this bit flag is clear, the operating system does not automatically restore the connection at logon.

CONNECT_COMMANDLINE

If this flag is set, the operating system prompts the user for authentication using the command line instead of a graphical user interface (GUI). This flag is ignored unless CONNECT_INTERACTIVE is also set.

Windows 2000/NT and Windows Me/98/95:  This value is not supported.

CONNECT_CMD_SAVECRED

If this flag is set, and the operating system prompts for a credential, the credential should be saved by the credential manager. If the credential manager is disabled for the caller's logon session, or if the network provider does not support saving credentials, this flag is ignored. This flag is also ignored unless you set the CONNECT_COMMANDLINE flag.

Windows 2000/NT and Windows Me/98/95:  This value is not supported.

 

lpAccessName [out]

Pointer to a buffer that receives system requests on the connection. This parameter can be NULL.

If this parameter is specified, and the lpLocalName member of the NETRESOURCE structure specifies a local device, this buffer receives the local device name. If lpLocalName does not specify a device and the network requires a local device redirection, or if the CONNECT_REDIRECT value is set, this buffer receives the name of the redirected local device.

Otherwise, the name copied into the buffer is that of a remote resource. If specified, this buffer must be at least as large as the string pointed to by the lpRemoteName member.

lpBufferSize [in, out]

Pointer to a variable that specifies the size of the lpAccessName buffer, in characters. If the call fails because the buffer is not large enough, the function returns the required buffer size in this location. For more information, see the descriptions of the lpAccessName parameter and the ERROR_MORE_DATA error code in the Return Values section.

lpResult [out]

Pointer to a variable that receives additional information about the connection. This parameter can be the following value.

ValueMeaning
CONNECT_LOCALDRIVE

If this flag is set, the connection was made using a local device redirection. If the lpAccessName parameter points to a buffer, the local device name is copied to the buffer.

 

Return value

If the function succeeds, the return value is NO_ERROR.

If the function fails, the return value is a system error code, such as one of the following values.

Return codeDescription
ERROR_ACCESS_DENIED

The caller does not have access to the network resource.

ERROR_ALREADY_ASSIGNED

The local device specified by the lpLocalName member is already connected to a network resource.

ERROR_BAD_DEVICE

The value specified by lpLocalName is invalid.

ERROR_BAD_NET_NAME

The value specified by the lpRemoteName member is not acceptable to any network resource provider because the resource name is invalid, or because the named resource cannot be located.

ERROR_BAD_PROVIDER

The value specified by the lpProvider member does not match any provider.

ERROR_CANCELLED

The attempt to make the connection was canceled by the user through a dialog box from one of the network resource providers, or by a called resource.

ERROR_EXTENDED_ERROR

A network-specific error occurred. To obtain a description of the error, call the WNetGetLastError function.

ERROR_INVALID_ADDRESS

The caller passed in a pointer to a buffer that could not be accessed.

ERROR_INVALID_PARAMETER

This error is a result of one of the following conditions:

  1. The lpRemoteName member is NULL. In addition, lpAccessName is not NULL, but lpBufferSize is either NULL or points to zero.
  2. The dwType member is neither RESOURCETYPE_DISK nor RESOURCETYPE_PRINT. In addition, either CONNECT_REDIRECT is set in dwFlags and lpLocalName is NULL, or the connection is to a network that requires the redirecting of a local device.
ERROR_INVALID_PASSWORD

The specified password is invalid and the CONNECT_INTERACTIVE flag is not set.

ERROR_MORE_DATA

The lpAccessName buffer is too small.

If a local device is redirected, the buffer needs to be large enough to contain the local device name. Otherwise, the buffer needs to be large enough to contain either the string pointed to by lpRemoteName, or the name of the connectable resource whose alias is pointed to by lpRemoteName. If this error is returned, then no connection has been made.

ERROR_NO_MORE_ITEMS

The operating system cannot automatically choose a local redirection because all the valid local devices are in use.

ERROR_NO_NET_OR_BAD_PATH

The operation could not be completed, either because a network component is not started, or because the specified resource name is not recognized.

ERROR_NO_NETWORK

The network is unavailable.

 

Remarks

Windows Server 2003 and Windows XP:  The WNet functions create and delete network drive letters in the MS-DOS device namespace associated with a logon session because MS-DOS devices are identified by AuthenticationID. (An AuthenticationID is the locally unique identifier, or LUID, associated with a logon session.) This can affect applications that call one of the WNet functions to create a network drive letter under one user logon, but query for existing network drive letters under a different user logon. An example of this situation could be when a user's second logon is created within a logon session, for example, by calling the CreateProcessAsUser function, and the second logon runs an application that calls the GetLogicalDrives function. GetLogicalDrives does not return network drive letters created by a WNet function under the first logon. Note that in the preceding example the first logon session still exists, and the example could apply to any logon session, including a Terminal Services session. For more information, see Defining an MS-DOS Device Name.

Requirements

Minimum supported client

Windows 2000 Professional [desktop apps only]

Minimum supported server

Windows 2000 Server [desktop apps only]

Header

Winnetwk.h

Library

Mpr.lib

DLL

Mpr.dll

Unicode and ANSI names

WNetUseConnectionW (Unicode) and WNetUseConnectionA (ANSI)

See also

Windows Networking (WNet) Overview
Windows Networking Functions
WNetAddConnection2
WNetAddConnection3
WnetCancelConnection
WNetGetConnection

 

 

Community Additions

ADD
Show:
© 2014 Microsoft