Export (0) Print
Expand All

Extended Error Information Detection Locations

The following table lists the Extended Error Information detection locations for Windows XP.

CodeNameDescription and parameters
10DealWithLRPCRequest10The server is not listening. The first parameter is a ULONG indicating whether RpcServerListen has been called, and the second parameter is the number of registered auto listen interfaces.
11DealWithLRPCRequest20Allocation/initialization of a server-side call object failed.
12WithLRPCRequest30A call could not be queued on the server due to lack of memory.
13WithLRPCRequest40A thread could not be created on the server.
20LrpcMessageToRpcMessage10RPC could not allocate memory on the server to hold the message sent from the client. The first parameter is a ULONG with the amount of memory in bytes that was requested.
21LrpcMessageToRpcMessage20An LPC call to NtReadRequestData failed. The first parameter is a ULONG with the NTSTATUS code returned from LPC.
22LrpcMessageToRpcMessage30A reply could not be sent from the server to the client. The first parameter is a ULONG describing the NTSTATUS with which the operation failed.
30DealWithRequestMessage10The requested interface is not available on the server. The first parameter is a ULONG describing the internal RPC identifier of the interface. This identifier does not correspond to any part of the interface name or interface UUID.
31DealWithRequestMessage20The server is not listening.
32DealWithRequestMessage30A dispatch to the server routine failed.
40CheckSecurity10The security callback for the given interface returned a value other than RPC_S_OK. The returned value is in the first parameter, which is a ULONG.
50DealWithBindMessage10Saving the token of the client failed.
51DealWithBindMessage20Information from the client token could not be retrieved. The first parameter is a ULONG and contains the error with which the operation failed.
52DealWithBindMessage30Allocating of a server-side security context failed. The first parameter is a ULONG with the number of bytes that RPC tried to allocate.
53DealWithBindMessage40Inserting the server security context into the dictionary failed due to low memory.
54DealWithBindMessage50Processing the presentation context sent by the client failed. Either the presentation context was invalid or there was not enough memory.
55DealWithBindMessage60An improperly formed request was received by the server from the client. The first parameter is a ULONG with the total number of contexts. The second parameter is a ULONG with the expected size of the request. The third parameter is a ULONG with the actual size of the request.
60FindServerCredentials10Getting the server credentials failed. The first parameter is ULONG with the authentication service. The second parameter is a ULONG with the authentication level.
61FindServerCredentials20A call to the security interface AcquireCredentialsHandle failed. The error code is the error returned from AcquireCredentialsHandle. The first parameter is a Unicode string to the principal name. The second is a Unicode string to the security package name.
62FindServerCredentials30A call to the security interface AcquireCredentialsHandle failed. The error code is the mapped by RPC error code. The first parameter is a ULONG with the error code returned from AcquireCredentialsHandle.
70AcceptFirstTime10A call to the security interface AcceptSecurityContext failed on the first leg. The error code is the error returned from AcceptSecurityContext. The first parameter is ULONG with the authentication service. The second parameter is a ULONG with the authentication level. Third parameter is ULONG with the context requirements.
71AcceptThirdLeg10A call to the security interface AcceptSecurityContext failed on second or subsequent legs. The error code is the error returned from AcceptSecurityContext. The first parameter is ULONG with the authentication service. The second parameter is a ULONG with the authentication level. Third parameter is ULONG with the result from GetLastError.
72AcceptThirdLeg20A call to the security interface AcceptSecurityContext failed on second or subsequent legs. The error code is the error returned from AcceptSecurityContext. The first parameter is ULONG with the authentication service. The second parameter is a ULONG with the authentication level.
73AcceptFirstTime20A call to the security interface AcceptSecurityContext failed on the first leg. The error code is the mapped by RPC error code. The first parameter is a ULONG with the error code returned from AcceptSecurityContext.
74AcceptThirdLeg40A call to the security interface AcceptSecurityContext failed on second or subsequent legs. The error code is the mapped by RPC error code. The first parameter is a ULONG with the error code returned from AcceptSecurityContext.
80AssociationRequested10The client has requested to establish a connection on an existing association but this association does not exist on the server. The first parameter is the association identifier requested by the client (ULONG). The second and third parameters are ULONGLONG and are a debug identifier of the client which depends on the protocol sequence.
81AssociationRequested20Could not allocate association on the server due to lack of memory. The first parameter is a ULONG of the size necessary for the association block.
82AssociationRequested30RPC failed to acquire the credentials for the server. The first parameter is ULONG with the authentication service. The second parameter is a ULONG with the authentication level.
90CompleteSecurityToken10A call to the security interface CompleteAuthToken failed. The error is the error returned by CompleteAuthToken. The first parameter is a ULONG with the authentication service. The second parameter is a ULONG with the authentication level.
91CompleteSecurityToken20A call to the security interface CompleteAuthToken failed. The first parameter is a ULONG with the error from the CompleteAuthToken error.
100AcquireCredentialsForClient10A call to the security interface AcquireCredentialsHandle failed on the client side. The error is the error returned by AcquireCredentialsHandle. The first parameter is a ULONG with the authentication service. The second parameter is a ULONG with the authentication level.
101AcquireCredentialsForClient20Error while acquiring the credentials on the client. The specified security package could not be found. The first parameter is a ULONG with the authentication service. The second parameter is a ULONG with the authentication level.
102AcquireCredentialsForClient30The version of the SCHANNEL credentials given to RPC was invalid. The first parameter is a ULONG with the authentication service. The second parameter is a ULONG with the authentication level.
110InquireDefaultPrincName10A call to the security interface QueryCredentialsAttributes failed. The error is the error returned by QueryCredentialsAttributes. The first parameter is a ULONG with the authentication service.
111InquireDefaultPrincName20A call to the security interface QueryCredentialsAttributes failed. The error is the RPC error that was mapped to the security error. The first parameter is a ULONG with the original security error.
120SignOrSeal10A failure occurred while trying to sign or encrypt a message. The error is the original security error code. The first parameter is a ULONG with the authentication service. The second parameter is a ULONG with the authentication level.
130VerifyOrUnseal10A failure occurred while trying to verify the signature or decrypt a message. The first parameter is the original security error code. The second parameter is a ULONG with the authentication service. The third parameter is a ULONG with the authentication level.
131VerifyOrUnseal20The third leg of authentication has failed, and a subsequent attempt to verify or unseal a packet also failed. The first parameter is a ULONG with the error with which the third leg failed.
140InitializeFirstTime10A call to the security interface InitializeSecurityContext failed on first leg of security context negotiation. The error is the error returned by InitializeSecurityContext. The first parameter is a ULONG with the authentication service. The second parameter is a ULONG with the authentication level. The third parameter is a Unicode string with the specified server principal name. The fourth parameter is the context requirements.
141InitializeFirstTime20A call to the security interface InitializeSecurityContext failed on first leg of security context negotiation. The error is the error RPC mapped to the security error returned by InitializeSecurityContext. The first parameter is a ULONG with the original security error.
142InitializeFirstTime30A call to the security interface QueryContextAttributes failed during first leg of security context negotiation. The first parameter is a ULONG with the authentication service. The second parameter is a ULONG with the authentication level. The third parameter is a ULONG with the context requirements.
150InitializeThirdLeg10A call to the security interface InitializeSecurityContext failed on second or subsequent legs of security context negotiation. The error is the error returned by InitializeSecurityContext. The first parameter is a ULONG with the authentication service. The second parameter is a ULONG with the authentication level. The third parameter is the context attributes.
151InitializeThirdLeg20A call to the security interface InitializeSecurityContext failed on second or subsequent legs of security context negotiation. The error is the error RPC mapped to the security error returned by InitializeSecurityContext. The first parameter is a ULONG with the original security error.
152InitializeThirdLeg30A security context was established, but the caller asked RPC for RPC_C_IMP_LEVEL_IDENTIFY impersonation, and the security context does not support that. The first parameter is a ULONG with SEC_E_SECURITY_QOS_FAILED. The second parameter is the impersonation type asked by the caller. The third parameter is the attributes of the security context.
153InitializeThirdLeg40A security context was established, but the caller asked RPC for RPC_C_IMP_LEVEL_DELEGATE impersonation, and the security context does not support that. The first parameter is a ULONG with SEC_E_SECURITY_QOS_FAILED. The second parameter is the impersonation type asked by the caller. The third parameter is the attributes of the security context.
154InitializeThirdLeg50A security context was established, but the caller asked RPC for mutual authentication, and the security context does not support that. The first parameter is a ULONG with SEC_E_SECURITY_QOS_FAILED. The second parameter is the impersonation type asked by the caller. The third parameter is the attributes of the security context.
155InitializeThirdLeg60A call to the security interface QueryContextAttributes failed during certificate verification. The first parameter is a ULONG with the original error returned from the security interface.
160ImpersonateClient10A call to the security interface ImpersonateSecurityContext failed. The first parameter is a ULONG with the original error returned from the security interface. The second parameter is the authentication service. The third parameter is the authentication level.
170DispatchToStub10No type was registered for this interface.
171DispatchToStub20This interface has been unregistered.
180DispatchToStubWorker10A call to an autolisten interface was made, but the number of calls active inside this autolisten interface has exceeded the maximum number of calls for this interface. The first parameter is a ULONG with the number of active calls inside the autolisten interface. The second parameter is a ULONG with the maximum number of calls allowed for the autolisten interface.
181DispatchToStubWorker20A call was made, but the server is not listening.
182DispatchToStubWorker30A call was made but the number of maximum calls allowed for the server was exceeded.
183DispatchToStubWorker40A call was made but the procedure requested does not exist for this interface.
190NMPOpen10A call to CreateFile to open a named pipe to the server failed. The first parameter is a Unicode string to the pipe. The second parameter is a ULONG with the Security QOS flags for the pipe.
191NMPOpen20The server did not accept the named pipe connection for a given time out. The first parameter is a Unicode string to the pipe.
192NMPOpen30The network address passed to RPC was invalid. The first argument is a Unicode string with the network address.
193NMPOpen40A call to CreateFile to open a named pipe to the server failed. The error code is the error RPC mapped to the error code from CreateFile.
200NMPSyncSend10A call to WriteFile failed. Parameters 1, 2 and 4 are values internal to RPC. The third parameter is the length of the data given to WriteFile.
210NMPSyncSendReceive10A call to TransactNamedPipe failed. Parameters 1 and 2 are internal to RPC. The third parameter is the size of the data that were sent.
220NMPSyncSendReceive20The data read from the pipe was invalid, or not all data could be read. Parameters 1 and 2 are internal to RPC. The third parameter is a ULONG with the data that were sent to the server.
221NMPSyncSendReceive30The data read from the pipe was invalid, or not all data could be read.
230COSend10An attempt to send data failed. The error is the original error code from the IO system. Parameters 1 and 2 are internal to RPC. The third parameter is the size of the data RPC was trying to send.
240COSubmitRead10RPC failed to submit a read for data to the IO system. The error code is the original error from the IO system.
250COSubmitSyncRead10RPC failed to submit a receive for data to the IO subsystem. The error is the original error from the IO system.
251COSubmitSyncRead20RPC failed to submit a receive for data to the IO subsystem. The error is the original error from the IO system.
260COSyncRecv10RPC tried to receive data from the IO subsystem, but the operation failed. The error is the original error from the IO system.
270WSCheckForShutdowns10RPC received a shutdown notification from the server.
271WSCheckForShutdowns20RPC received a fault packet from the server. The first parameter is a ULONG with the status from the fault packet. The second parameter is the number of iterations completed.
272WSCheckForShutdowns30RPC received a fault packet from the server. The first parameter is a ULONG with the status from the fault packet. The second parameter is the number of iterations completed.
273WSCheckForShutdowns40RPC received unrecognized packet from the server. The first parameter is a ULONG with the type of the packet. The second parameter is the number of iterations completed.
274WSCheckForShutdowns50RPC failed to submit a receive for data to the IO subsystem. The error is the original error from the IO system. The first parameter is the number of completed iterations.
280WSSyncSend10An error was encountered while RPC was checking for shutdowns from the server.
281WSSyncSend20RPC failed to send data. The error is the error received from the IO system.
282WSSyncSend30RPC failed to send data.
290WSSyncRecv10RPC failed to receive data from Windows Sockets (Winsock). The error is the error received from Winsock. If the error is 0, The first parameter is the number of bytes received.
291WSSyncRecv20The time out for the connection was exceeded while trying to receive data from Winsock.
292WSSyncRecv30RPC failed to receive data from Winsock. The error is the error received from Winsock.
300WSServerListenCommon10RPC could not open a socket. The first parameter is a ULONG with the address family for the socket. The second parameter is a ULONG with the socket type. Third parameter is a ULONG with the protocol.
301WSServerListenCommon20RPC called the Winsock listen API but it failed. The first parameter is a ULONG with the original error code from Winsock. The second parameter is internal to RPC. Third parameter is a ULONG with the queue size.
302WSServerListenCommon30RPC could not open a socket. The error code is the RPC error that was mapped to the original Winsock error.
310WSOpen10RPC could not open a socket. The first parameter is a ULONG with the address family for the socket. The second parameter is a ULONG with the socket type. Third parameter is a ULONG with the protocol.
311WSOpen20RPC failed to bind or connect to the server. The first parameter is the server port. The second and third parameters are ULONGs that contain portions of the server IP address. If the protocol is IPv4, the third parameter contains the full IP address, and the second is 0. If the protocol is IPv6, the third parameter contains the last 8 bytes from the server IP address and the second parameter contains the previous 8 bytes.
312WSOpen30RPC could not open a socket. The error code is the RPC error that was mapped to the original Winsock error.
313WSOpen40RPC failed to bind or connect to the server. The error code is the RPC error that was mapped to the original Winsock error.
314WSOpen50RPC initiated a connect operation to the server but the call time out expired before the connect completed. The first parameter is a ULONG with the time out.
315WSOpen60RPC failed to bind the socket. The error code is the original error code received from Winsock.
316WSOpen70RPC failed to retrieve the address of the ConnectEx function from Winsock. Chances are the Winsock provider does not support ConnectEx.
317WSOpen80RPC called ConnectEx but it failed. The error is the original Winsock error code.
318WSOpen90RPC called ConnectEx but it failed. The error is the original NTSTATUS error code.
320NextAddress10RPC called Winsock's getaddrinfo API to resolve the server's name, but this failed. The error code is the original error code received from Winsock. The first parameter is a Unicode string with the server DNS name that RPC attempted to resolve.
321NextAddress20RPC called Winsock's getaddrinfo API but failed because of insufficient memory.
322NextAddress30RPC called Winsock's getaddrinfo API but failed for reasons other than insufficient memory.
323NextAddress40RPC has reached the end of the list of IP addresses resolved for a given DNS name.
330WSBind10RPC failed to allocate a port from the reserved range specified by the firewall settings. Most likely the firewall settings are invalid.
331WSBind20RPC failed to set a socket option.
332WSBind30RPC failed to bind to a port. Most likely there were no ports available.
333WSBind40RPC failed to bind to a port due to low memory.
334WSBind50RPC failed to bind to a port for other reasons. The error is the original error code received from Winsock.
335WSBind45RPC failed to bind to a port because the port is already in use. The first parameter is a ULONG with the port RPC is trying to use.
340IPBuildAddressVector10RPC failed to allocate memory to build an address vector. The first parameter is a ULONG with the original error from the allocation.
350GetStatusForTimeout10A call time out was hit. The first parameter is a hex constant. The second parameter is a ULONG with the call time out in milliseconds.
351GetStatusForTimeout20A time out was hit while binding to the server. The first parameter is ULONG with a large hex constant. The second parameter is a ULONG with the time out in milliseconds that was hit.
360OSF_CCONNECTION__SendFragment10A time out was hit while sending/receiving data to/from the server. The first parameter is ULONG with a large hex constant. The second parameter is a ULONG with the time out in milliseconds that was hit.
361OSF_CCONNECTION__SendFragment20A time out was hit while sending/receiving data to/from the server. The first parameter is ULONG with a large hex constant. The second parameter is a ULONG with the time out in milliseconds that was hit.
370OSF_CCALL__ReceiveReply10A failure was hit while receiving data from the server. The first parameter is a ULONG with a value internal to Microsoft.
371OSF_CCALL__ReceiveReply20A time out was hit while receiving data from the server. The first parameter is ULONG with a large hex constant. The second parameter is a ULONG with the time out in milliseconds that was hit.
380OSF_CCALL__FastSendReceive10A failure was hit while receiving data from the server. The first parameter is a ULONG with a value internal to Microsoft.
381OSF_CCALL__FastSendReceive20A failure was hit while receiving data from the server. The first parameter is a ULONG with a value internal to Microsoft.
382OSF_CCALL__FastSendReceive30A time out was hit while receiving data from the server. The first parameter is ULONG with a large hex constant. The second parameter is a ULONG with the time out in milliseconds that was hit.
390LRPC_BINDING_HANDLE__AllocateCCall10A network address was specified in the LRPC binding handle that was different than the local computer name. LRPC supports only calls with an empty network address or a network address that is the same as the local computer name. The first parameter is a Unicode string with the network address from the binding handle. The second parameter is a Unicode string with the local computer name.
391LRPC_BINDING_HANDLE__AllocateCCall20RPC encountered a failure while resolving a dynamic endpoint. Error code is the original error code with which resolving failed. The first parameter is a ULONG with the first DWORD of the Interface UUID of the interface on which the call was made.
400LRPC_ADDRESS__ServerSetupAddress10The server endpoint length exceeded the maximum allowed endpoint length. The first parameter is a Unicode string with the endpoint name. The second parameter is a ULONG with the calculated length of that string. Third parameter is a ULONG with the maximum allowed length for the endpoint.
410LRPC_ADDRESS__HandleInvalidAssociationReference10The client has sent a packet to a server endpoint that is no longer valid. The first parameter is a ULONG with a index internal to Microsoft.
420InitializeAuthzSupportIfNecessary10RPC failed to load Authz.dll. The error code is the original error code from LoadLibrary. The first parameter is a Unicode string with the Authz.dll string.
421InitializeAuthzSupportIfNecessary20RPC failed to retrieve the address of a routine from Authz.dll. The error is the original error code from GetProcAddress. The first parameter is an ANSI string with the name of the routine that RPC could not get the procedure address for.
430CreateDummyResourceManagerIfNecessary10RPC failed to retrieve the address of a routine from Authz.dll. The error is the original error code from GetProcAddress. The first parameter is an ANSI string with the name of the routine that RPC could not get the procedure address for.
431CreateDummyResourceManagerIfNecessary20RPC called AuthzInitializeResourceManager, but this failed. The error code with which it failed is in the Status field.
440LRPC_SCALL__GetAuthorizationContext10RPC failed to impersonate the client. The status field is the original error with which the impersonation call failed. The first parameter is a ULONG with the value of the ImpersonateOnReturn parameter. The second parameter is a ULONGLONG with a value internal to Microsoft.
441LRPC_SCALL__GetAuthorizationContext20RPC failed to open the current thread token. Status is the original error with which opening the thread token failed. The first parameter is the identifier of the thread for which the operation failed.
442LRPC_SCALL__GetAuthorizationContext30RPC failed to retrieve an authorization context from the anonymous user SID. Status is the error from the AuthzInitializeContextFromSid function. The first parameter is a ULONG with the thread identifier of the thread. The second parameter is a ULONGLONG with a value internal to Microsoft.
450SCALL__DuplicateAuthzContext10RPC called AuthzInitializeContextFromAuthzContext but it failed. The Status field is the original error from the AuthzInitializeContextFromAuthzContext API. The first parameter is a ULONG with the identifier of the thread on which the error occurred. The second parameter is a ULONGLONG with a value internal to Microsoft.
460SCALL__CreateAndSaveAuthzContextFromToken10RPC called AuthzInitializeContextFromToken but it failed. The Status field is the original error from the AuthzInitializeContextFromToken API. The first parameter is a ULONG with the identifier of the thread on which the error occurred. The second parameter is a ULONGLONG with a value internal to Microsoft.
470SECURITY_CONTEXT__GetAccessToken10RPC called a security provider to retrieve the context attributes, but this operation failed (QueryContextAttributes). The first parameter is a ULONG with the original error from the SSPI API. The second parameter is a ULONG with the authentication service. Third parameter is a ULONG with the authentication level.
471SECURITY_CONTEXT__GetAccessToken20RPC called a security provider to retrieve the context token, but this operation failed (QuerySecurityContextToken). The first parameter is a ULONG with the original error from the SSPI API. The second parameter is a ULONG with the authentication service. Third parameter is a ULONG with the authentication level.
480OSF_SCALL__GetAuthorizationContext10RPC failed to impersonate the client. The status field is the original error with which the impersonation call failed. The first parameter is a ULONGLONG with a value internal to Microsoft. The second parameter is a ULONGLONG with 0.
500EpResolveEndpoint10RPC has reached the end of the endpoint list returned by the server. The first parameter is a Unicode string with the protocol sequence. The second parameter is a Unicode string with the network address of the server. Third parameter is a ULONG with the first DWORD of the interface UUID for the interface for which the call is made. Fourth parameter is a ULONG. The high word of the ULONG is the index of the last endpoint returned. The low word is the total number of endpoints returned by the server.
501EpResolveEndpoint20RPC failed to resolve an endpoint, because an error was returned from the server. The first parameter is a Unicode string with the protocol sequence. The second parameter is a Unicode string with the network address of the server. Third parameter is a ULONG with the first DWORD of the interface UUID for the interface for which the call is made. Fourth parameter is a ULONGLONG value internal to Microsoft.
510OSF_SCALL__GetBuffer10RPC failed to allocate memory. The first parameter is a ULONG with the amount of memory RPC tried to allocate.
520LRPC_SCALL__ImpersonateClient10RPC called NtImpersonateAnonymousToken, but it failed. The first parameter is a ULONG with the original error code returned from NtImpersonateAnonymousToken. The second parameter is a ULONG with the current thread identifier.
530SetMaximumLengths10RPC called a security provider to retrieve the security context attributes (QueryContextAttributes) but it failed. The first parameter is a ULONG with the original error code returned from the security provider. The second parameter is the result of GetLastError after QueryContextAttributes failed. Third parameter is a ULONG with the authentication service. Fourth parameter is a ULONGLONG value internal to Microsoft.
540LRPC_CASSOCIATION__ActuallyDoBinding10Either initializing asynchronous RPC failed, or establishing a connection between the client and the server failed. The first parameter is a Unicode string with the endpoint.
541LRPC_CASSOCIATION__ActuallyDoBinding20RPC failed to establish a connection between the client and the server. The first parameter is a Unicode string with the endpoint.
542LRPC_CASSOCIATION__ActuallyDoBinding30RPC failed to bind to the server because the server returned an error. The error returned from the server is in the Status field.
543LRPC_CASSOCIATION__ActuallyDoBinding40RPC failed to send a bind packet to the server. The original error code from LPC is a ULONG on the first parameter.
550LRPC_CASSOCIATION__CreateBackConnection10RPC failed to establish a connection between the client and the server. The first parameter is a Unicode string with the endpoint.
551LRPC_CASSOCIATION__CreateBackConnection20RPC failed to send a bind packet to the server. The original error code from LPC is a ULONG on the first parameter.
552LRPC_CASSOCIATION__CreateBackConnection30RPC failed to bind to the server because the server returned an error. The error returned from the server is in the Status field.
560LRPC_CASSOCIATION__OpenLpcPort10RPC failed to resolve the server principal name to a SID. The first parameter is a ULONG with the original error from LookupAccountName.
561LRPC_CASSOCIATION__OpenLpcPort20RPC tried to bind to the server, but could not because the server rejected the connection. The Status field is the error with which the server rejected the connection. The first parameter is a ULONG with STATUS_PORT_CONNECTION_REFUSED.
562LRPC_CASSOCIATION__OpenLpcPort30RPC tried to bind to the server, but could not because the server was not available. The first parameter is a ULONG with STATUS_PORT_CONNECTION_REFUSED.
563LRPC_CASSOCIATION__OpenLpcPort40RPC tried to establish a connection with the server but an error occurred. The first parameter is a ULONG with the original error returned from LPC.
570RegisterEntries10RPC tried to register an endpoint in the endpoint mapper database but an error occurred. The first parameter is a ULONG with the error code with which the operation failed.
571RegisterEntries20RPC tried to register an endpoint in the endpoint mapper database but an error occurred. The first parameter is a ULONG with the remapped error code.
580NDRSContextUnmarshall2_10The client passed a context handle to the server that the server doesn't recognize. Either this context handle doesn't exist on the server, or the given interface uses strict_context_handle and the given context handle was created on an interface other than the one on which this call is made. The first and second parameters are ULONGLONGs that taken together uniquely identify a context handle.
581NDRSContextUnmarshall2_20The context handle passed from the client to the server is currently being deleted by the server. The first and second parameters are ULONGLONGs that taken together uniquely identify a context handle.
582NDRSContextUnmarshall2_30RPC failed to allocate memory for new context handle. The first parameter is a ULONG to the size of the block that RPC tried to allocate.
583NDRSContextUnmarshall2_40RPC tried to lock the context handle for exclusive or shared use but the operation failed.
584NDRSContextUnmarshall2_50RPC tried to add the context handle to the list of active context handles but the operation failed due to insufficient memory.
590NDRSContextMarshall2_10RPC failed while it was either trying to allocate a unique identifier for the context handle or while it was trying to add the context handle to the list of active context handles.
600WinsockDatagramSend10The Winsock WSASendTo function failed. The first and second parameters identify the address to which the datagram was addressed.
601WinsockDatagramSend20RPC attempted to receive data from the server, but the operation failed. The Status field contains the original error returned from Winsock. The first parameter is a ULONG with a value internal to Microsoft.
610WinsockDatagramReceive10RPC attempted to post a receive to Winsock but the operation failed. The Status field contains the original error returned from Winsock. The first parameter is a ULONG with a value internal to Microsoft.
620WinsockDatagramSubmitReceive10RPC attempted to post a receive to Winsock but the operation failed. The Status field contains the original error returned from Winsock. The first parameter is a ULONG with a value internal to Microsoft.
630DG_CCALL__CancelAsyncCall10The asynchronous call was canceled. The first parameter is a ULONG that contains 0 if the call was canceled non-abortively and non-zero otherwise.
640DG_CCALL__DealWithTimeout10A cancel was issued for an RPC call and the time out for the cancel expired. The first parameter is a ULONG with the time out for the cancel. The second parameter is a ULONG with the time elapsed since the cancel was issued.
641DG_CCALL__DealWithTimeout20RPC hit a time out limit. The first parameter is a ULONG with the time out limit. The second parameter is the time elapsed since the last receive.
642DG_CCALL__DealWithTimeout30RPC encountered a time out while talking with the server.
650DG_CCALL__DispatchPacket10A packet was received from the server, but the client has already encountered a cancel time out for the call. The first parameter is a ULONG with the time out for the cancel. The second parameter is a ULONG with the time elapsed since the cancel was issued.
660DG_CCALL__ReceiveSinglePacket10RPC attempted to receive data from the server, but the operation failed.
661DG_CCALL__ReceiveSinglePacket20If the client gets an ICMP reject packet it may decide to auto reconnect and retry the call. This error record is added at the beginning of the auto reconnect. The first parameter is a ULONG with the auto reconnect flag for the connection. The second parameter is a ULONG with the buffer flags/
662DG_CCALL__ReceiveSinglePacket30RPC failed to receive data from the server.
670WinsockDatagramResolve10RPC failed to resolve a DNS name to an IP address. The first parameter is a Unicode string with the DNS name on which resolution was attempted.
680WinsockDatagramCreate10RPC failed to open a datagram socket. The first parameter is a ULONG with the address family. The second parameter is a ULONG with the protocol.
690TCP_QueryLocalAddress10The getsockname API failed. The first parameter is a ULONGLONG internal to Microsoft. The second parameter is the original error returned from Winsock.
691TCP_QueryLocalAddress20The setsockopt (with SO_UPDATE_ACCEPT_CONTEXT option) API failed. The first parameter is a ULONGLONG internal to Microsoft. The second parameter is the original error returned from Winsock.
700OSF_CASSOCIATION__ProcessBindAckOrNak10RPC received a packet from the server that was below the minimum acceptable length for this type of packet. The first parameter is a ULONG with the length of the packet in bytes. The second parameter is a ULONG with the minimum acceptable length of the packet in bytes.
701OSF_CASSOCIATION__ProcessBindAckOrNak20RPC failed to bind to the server because the server returned an error. The first parameter is a ULONG with the error returned from the server. The second parameter is a ULONG with the number of failures attempting to bind to this server/endpoint.
710MatchMsPrincipalName10Decoding the principal name failed.
720CompareRdnElement10The CertGetNameString call failed. The original error returned from CertGetNameString is encoded as a ULONG in the first parameter.
730MatchFullPathPrincipalName10Processing of the principal name failed.
731MatchFullPathPrincipalName20RPC failed to find a matching principal name. The first parameter is a ULONG with the original error code from the crypto APIs.
732MatchFullPathPrincipalName30The CertOpenStore call for the CA store failed.
733MatchFullPathPrincipalName40The CertOpenStore call for the ROOT store failed.
734MatchFullPathPrincipalName50RPC encountered an error processing the certificate. The first parameter is a ULONG with an additional error code.
740RpcCertGeneratePrincipalName10RPC encountered an error while generating the server principal name.
741RpcCertGeneratePrincipalName20RPC encountered an error while generating the server principal name.
742RpcCertGeneratePrincipalName30The CertGetNameString call failed. The first parameter is a ULONG with the original error code from CertGetNameString.
750RpcCertVerifyContext10The CertOpenStore call for the CA store failed.
751RpcCertVerifyContext20The CertGetCertificateChain call failed.
752RpcCertVerifyContext30The CertVerifyCertificateChainPolicy call failed.
753RpcCertVerifyContext40The CertVerifyCertificateChainPolicy call succeeded but an error was returned in the PolicyStatus. The first parameter is a ULONG with the result of GetLastError.
761OSF_BINDING_HANDLE__NegotiateTransferSyntax10RPC has encountered an error using a particular endpoint or the list of endpoints was exhausted. The first parameter is a Unicode string with the last tried endpoint.

 

 

 

Community Additions

ADD
Show:
© 2014 Microsoft