Export (0) Print
Expand All
Expand Minimize

Bug Check 0x9C: MACHINE_CHECK_EXCEPTION

The MACHINE_CHECK_EXCEPTION bug check has a value of 0x0000009C. This bug check indicates that a fatal machine check exception has occurred.

Important Info If You Have Received a STOP Code

bsod

If you received a blue screen error, or stop code, the computer has shut down abruptly to protect itself from data loss.

For information about how to recover from this error, see Resolving Blue Screen errors in Windows.

MACHINE_CHECK_EXCEPTION Parameters

The four parameters that are listed in the message have different meanings, depending on the processor type.

If the processor is based on an older x86-based architecture and has the Machine Check Exception (MCE) feature but not the Machine Check Architecture (MCA) feature (for example, the Intel Pentium processor), the parameters have the following meaning.

ParameterDescription

1

The low 32 bits of P5_MC_TYPE Machine Service Report (MSR)

2

The address of the MCA_EXCEPTION structure

3

The high 32 bits of P5_MC_ADDR MSR

4

The low 32 bits of P5_MC_ADDR MSR

 

If the processor is based on a newer x86-based architecture and has the MCA feature and the MCE feature (for example, any Intel Processor of family 6 or higher, such as Pentium Pro, Pentium IV, or Xeon), or if the processor is an x64-based processor, the parameters have the following meaning.

ParameterDescription

1

The bank number

2

The address of the MCA_EXCEPTION structure

3

The high 32 bits of MCi_STATUS MSR for the MCA bank that had the error

4

The low 32 bits of MCi_STATUS MSR for the MCA bank that had the error

 

On an Itanium-based processor, the parameters have the following meaning.

Note  Parameter 1 indicates the type of violation.

Parameter 1Parameter 2Parameter 3Parameter 4Cause

0x1

The address of the log

The size of the log

0

0x2

The address of the log

The size of the log

The error code

The system abstraction layer (SAL) returned an error for SAL_GET_STATEINFO while processing MCA.

0x3

The address of the log

The size of the log

The error code

SAL returned an error for SAL_CLEAR_STATEINFO while it processed MCA.

0x4

The address of the log

The size of the log

0

Firmware (FW) reported a fatal MCA.

0x5

The address of the log

The size of the log

0

There are two possible causes:

  • SAL reported a recoverable MCA, but this recovery is not currently supported.

  • SAL generated an MCA but could not produce an error record.

0xB

The address of the log

The size of the log

0

0xC

The address of the log

The size of the log

The error code

SAL returned an error for SAL_GET_STATEINFO while processing an INIT event.

0xD

The address of the log

The size of the log

The error code

SAL returned an error for SAL_CLEAR_STATEINFO while it processed an INIT event.

0xE

The address of the log

The size of the log

0

 

Remarks

In Windows Vista and later operating systems, this bug check occurs only in the following circumstances.

  • WHEA is not fully initialized.
  • All processors that rendezvous have no errors in their registers.

For other circumstances, this bug check has been replaced with bug Check 0x124: WHEA_UNCORRECTABLE_ERROR in Windows Vista and later operating systems.

For more information about Machine Check Architecture (MCA), see the Intel or AMD Web sites.

 

 

Send comments about this topic to Microsoft

Show:
© 2014 Microsoft