Expand Minimize

VirtualAllocExNuma function

Reserves or commits a region of memory within the virtual address space of the specified process, and specifies the NUMA node for the physical memory.

Syntax


LPVOID WINAPI VirtualAllocExNuma(
  _In_      HANDLE hProcess,
  _In_opt_  LPVOID lpAddress,
  _In_      SIZE_T dwSize,
  _In_      DWORD flAllocationType,
  _In_      DWORD flProtect,
  _In_      DWORD nndPreferred
);

Parameters

hProcess [in]

The handle to a process. The function allocates memory within the virtual address space of this process.

The handle must have the PROCESS_VM_OPERATION access right. For more information, see Process Security and Access Rights.

lpAddress [in, optional]

The pointer that specifies a desired starting address for the region of pages that you want to allocate.

If you are reserving memory, the function rounds this address down to the nearest multiple of the allocation granularity.

If you are committing memory that is already reserved, the function rounds this address down to the nearest page boundary. To determine the size of a page and the allocation granularity on the host computer, use the GetSystemInfo function.

If lpAddress is NULL, the function determines where to allocate the region.

dwSize [in]

The size of the region of memory to be allocated, in bytes.

If lpAddress is NULL, the function rounds dwSize up to the next page boundary.

If lpAddress is not NULL, the function allocates all pages that contain one or more bytes in the range from lpAddress to (lpAddress+dwSize). This means, for example, that a 2-byte range that straddles a page boundary causes the function to allocate both pages.

flAllocationType [in]

The type of memory allocation. This parameter must contain one of the following values.

ValueMeaning
MEM_COMMIT
0x00001000

Allocates memory charges (from the overall size of memory and the paging files on disk) for the specified reserved memory pages. The function also guarantees that when the caller later initially accesses the memory, the contents will be zero. Actual physical pages are not allocated unless/until the virtual addresses are actually accessed.

To reserve and commit pages in one step, call the function with MEM_COMMIT | MEM_RESERVE.

Attempting to commit a specific address range by specifying MEM_COMMIT without MEM_RESERVE and a non-NULL lpAddress fails unless the entire range has already been reserved. The resulting error code is ERROR_INVALID_ADDRESS.

An attempt to commit a page that is already committed does not cause the function to fail. This means that you can commit pages without first determining the current commitment state of each page.

MEM_RESERVE
0x00002000

Reserves a range of the process's virtual address space without allocating any actual physical storage in memory or in the paging file on disk.

You commit reserved pages by calling the function again with MEM_COMMIT. To reserve and commit pages in one step, call the function with MEM_COMMIT | MEM_RESERVE.

Other memory allocation functions, such as malloc and LocalAlloc, cannot use reserved memory until it has been released.

MEM_RESET
0x00080000

Indicates that data in the memory range specified by lpAddress and dwSize is no longer of interest. The pages should not be read from or written to the paging file. However, the memory block will be used again later, so it should not be decommitted. This value cannot be used with any other value.

Using this value does not guarantee that the range operated on with MEM_RESET will contain zeros. If you want the range to contain zeros, decommit the memory and then recommit it.

When you use MEM_RESET, the function ignores the value of fProtect. However, you must still set fProtect to a valid protection value, such as PAGE_NOACCESS.

The function returns an error if you use MEM_RESET and the range of memory is mapped to a file. A shared view is only acceptable if it is mapped to a paging file.

MEM_RESET_UNDO
0x1000000

MEM_RESET_UNDO should only be called on an address range to which MEM_RESET was successfully applied earlier. It indicates that the data in the specified memory range specified by lpAddress and dwSize is of interest to the caller and attempts to reverse the effects of MEM_RESET. If the function succeeds, that means all data in the specified address range is intact. If the function fails, at least some of the data in the address range has been replaced with zeroes.

This value cannot be used with any other value. If MEM_RESET_UNDO is called on an address range which was not MEM_RESET earlier, the behavior is undefined. When you specify MEM_RESET, the VirtualAllocExNuma function ignores the value of flProtect. However, you must still set flProtect to a valid protection value, such as PAGE_NOACCESS.

Windows Server 2008 R2, Windows 7, Windows Server 2008, and Windows Vista:  The MEM_RESET_UNDO flag is not supported until Windows 8 and Windows Server 2012.

 

This parameter can also specify the following values as indicated.

ValueMeaning
MEM_LARGE_PAGES
0x20000000

Allocates memory using large page support.

The size and alignment must be a multiple of the large-page minimum. To obtain this value, use the GetLargePageMinimum function.

MEM_PHYSICAL
0x00400000

Reserves an address range that can be used to map Address Windowing Extensions (AWE) pages.

This value must be used with MEM_RESERVE and no other values.

MEM_TOP_DOWN
0x00100000

Allocates memory at the highest possible address.

 

flProtect [in]

The memory protection for the region of pages to be allocated. If the pages are being committed, you can specify any one of the memory protection constants.

Protection attributes specified when protecting a page cannot conflict with those specified when allocating a page.

nndPreferred [in]

The NUMA node where the physical memory should reside.

Used only when allocating a new VA region (either committed or reserved). Otherwise this parameter is ignored when the API is used to commit pages in a region that already exists

Return value

If the function succeeds, the return value is the base address of the allocated region of pages.

If the function fails, the return value is NULL. To get extended error information, call GetLastError.

Remarks

Each page has an associated page state. The VirtualAllocExNuma function can perform the following operations:

  • Commit a region of reserved pages
  • Reserve a region of free pages
  • Simultaneously reserve and commit a region of free pages

VirtualAllocExNuma cannot reserve a reserved page. It can commit a page that is already committed. This means you can commit a range of pages, regardless of whether they have already been committed, and the function will not fail.

You can use VirtualAllocExNuma to reserve a block of pages and then make additional calls to VirtualAllocExNuma to commit individual pages from the reserved block. This enables a process to reserve a range of its virtual address space without consuming physical storage until it is needed.

If the lpAddress parameter is not NULL, the function uses the lpAddress and dwSize parameters to compute the region of pages to be allocated. The current state of the entire range of pages must be compatible with the type of allocation specified by the flAllocationType parameter. Otherwise, the function fails and none of the pages is allocated. This compatibility requirement does not preclude committing an already committed page; see the preceding list.

Because VirtualAllocExNuma does not allocate any physical pages, it will succeed whether or not the pages are available on that node or elsewhere in the system. The physical pages are allocated on demand. If the preferred node runs out of pages, the memory manager will use pages from other nodes. If the memory is paged out, the same process is used when it is brought back in.

To execute dynamically generated code, use VirtualAllocExNuma to allocate memory and the VirtualProtectEx function to grant PAGE_EXECUTE access.

The VirtualAllocExNuma function can be used to reserve an Address Windowing Extensions (AWE) region of memory within the virtual address space of a specified process. This region of memory can then be used to map physical pages into and out of virtual memory as required by the application. The MEM_PHYSICAL and MEM_RESERVE values must be set in the AllocationType parameter. The MEM_COMMIT value must not be set. The page protection must be set to PAGE_READWRITE.

The VirtualFreeEx function can decommit a committed page, releasing the page's storage, or it can simultaneously decommit and release a committed page. It can also release a reserved page, making it a free page.

To compile an application that uses this function, define _WIN32_WINNT as 0x0600 or later.

Examples

For an example, see Allocating Memory from a NUMA Node.

Requirements

Minimum supported client

Windows Vista [desktop apps only]

Minimum supported server

Windows Server 2008 [desktop apps only]

Header

WinBase.h (include Windows.h)

Library

Kernel32.lib

DLL

Kernel32.dll

See also

Memory Management Functions
NUMA Support
Virtual Memory Functions
VirtualAllocEx
VirtualFreeEx
VirtualLock
VirtualProtect
VirtualQuery

 

 

Community Additions

ADD
Show:
© 2014 Microsoft