Share via


Extended TAPI Functions (Windows Embedded CE 6.0)

1/6/2010

The following functions are used with Extended TAPI.

Function Description

lineGetCallBarringCaps

Retrieves the barring modes supported by the radio hardware and network.

lineGetCallBarringState

Retrieves the current barring state for a given mode. Not implemented for Code-Division Multiple Access (CDMA).

lineGetCallWaitingCaps

Retrieves the set of media modes for which call waiting is supported by the radio hardware and network.

lineGetCallWaitingState

Retrieves the list of media modes for which call waiting is enabled. Not implemented for CDMA.

lineSetCurrentAddressID

Retrieves the current line address ID. Not implemented for CDMA.

lineGetCurrentHSCSDStatus

Retrieves the current non-transparent High Speed Circuit Switched Data (HSCSD) configuration. Not implemented for CDMA.

lineGetCurrentOperator

Retrieves the network operator on which the device is currently registered. Not implemented for CDMA.

lineGetCurrentSystemType

Retrieves the current line system type.

lineGetEquipmentState

Retrieves the state of the radio transmitter and receiver.

lineGetGeneralInfo

Retrieves general device information about the radio hardware, the radio software, the serial number, subscriber identity, and others.

lineGetGPRSClass

Retrieves the General Packet Radio Service (GPRS) class of the device and network. Not implemented for CDMA.

lineGetHSCSDCaps

Retrieves the HSCSD device capabilities. Not implemented for CDMA.

lineGetHSCSDState

Retrieves the non-transparent HSCSD configuration to be applied during the next data call. Not implemented for CDMA.

lineGetMuteState

Retrieves the mute state of the device.

lineGetNumberCalls

Retrieves all three call counts for the given line.

lineGetOperatorStatus

Retrieves the lists of preferred and available operators. Not implemented for CDMA.

lineGetRadioPresence

Determines whether a radio module is present or not.

lineGetRegisterStatus

Retrieves the network registration status of the device.

lineGetSendCallerIDState

Indicates if Caller ID info is sent on a mobile-device-originated call. Not implemented for CDMA.

lineGetUSSD

Reads an Unstructured Supplementary Service Data (USSD) message. Not implemented for CDMA.

lineRegister

Registers the device with a particular network operator. Not implemented for CDMA.

lineSendUSSD

Sends a USSD message. Not implemented for CDMA.

lineSetCallBarringPassword

Changes the call-barring password. Not implemented for CDMA.

lineSetCallBarringState

Sets call barring of media modes for a given call-barring mode. Not implemented for CDMA.

lineSetCallWaitingState

Sets call waiting for a given set of media modes. Not implemented for CDMA.

lineSetCurrentAddressID

Sets the current line address ID. Not implemented for CDMA.

lineSetEquipmentState

Sets the state of the radio transmitter and receiver.

lineSetGPRSClass

Sets the GPRS class of the device and the network. Not implemented for CDMA.

lineSetHSCSDState

Sets the non-transparent HSCSD configuration prior to a data call. Not implemented for CDMA.

lineSetMuteState

Sets the mute state.

lineSetPreferredOperator

Sets or deletes preferred operators. Not implemented for CDMA.

lineSetSendCallerIDState

Sets whether or not Caller ID is sent on a mobile-device-originated call. Not implemented for CDMA.

lineUnregister

Deregisters the device from the current network operator.

Ee497042.note(en-US,WinEmbedded.60).gifNote:
This function is not supported for CDMA.

See Also

Other Resources

Extended TAPI