Freigeben über


Directory.SetCreationTime(String, DateTime) Methode

Definition

Legt das Erstellungsdatum und den Erstellungszeitpunkt für die angegebene Datei bzw. das angegebene Verzeichnis fest.

public:
 static void SetCreationTime(System::String ^ path, DateTime creationTime);
public static void SetCreationTime (string path, DateTime creationTime);
static member SetCreationTime : string * DateTime -> unit
Public Shared Sub SetCreationTime (path As String, creationTime As DateTime)

Parameter

path
String

Die Datei oder das Verzeichnis, für das die Informationen über Erstellungsdatum und -zeitpunkt festgelegt werden sollen.

creationTime
DateTime

Datum und Zeitpunkt des letzten Schreibvorgangs in einer Datei oder einem Verzeichnis. Dieser Wert wird in Ortszeit angegeben.

Ausnahmen

Der angegebene Pfad wurde nicht gefunden.

.NET Framework und .NET Core-Versionen älter als 2.1: path ist eine Zeichenfolge der Länge null, enthält nur Leerzeichen oder enthält ein oder mehrere ungültige Zeichen. Sie können Abfragen für ungültige Zeichen mithilfe der GetInvalidPathChars()-Methode ausführen.

path ist null.

Der angegebene Pfad und/oder Dateiname überschreiten die vom System definierte maximale Länge.

Der Aufrufer verfügt nicht über die erforderliche Berechtigung.

creationTime gibt einen Wert außerhalb des Datums- oder Zeitbereichs an, der für diesen Vorgang zulässig ist.

Das aktuelle Betriebssystem ist nicht Windows NT oder höher.

Beispiele

Das folgende Beispiel veranschaulicht die Unterschiede bei der Ausgabe bei der Verwendung der UTC-Ausgabe (Coordinated Universal Time).

// This sample shows the differences between dates from methods that use
//coordinated universal time (UTC) format and those that do not.
using namespace System;
using namespace System::IO;
int main()
{
   
   // Set the directory.
   String^ n = "C:\\test\\newdir";
   
   //Create two variables to use to set the time.
   DateTime dtime1 = DateTime(2002,1,3);
   DateTime dtime2 = DateTime(1999,1,1);
   
   //Create the directory.
   try
   {
      Directory::CreateDirectory( n );
   }
   catch ( IOException^ e ) 
   {
      Console::WriteLine( e );
   }

   
   //Set the creation and last access times to a variable DateTime value.
   Directory::SetCreationTime( n, dtime1 );
   Directory::SetLastAccessTimeUtc( n, dtime1 );
   
   // Print to console the results.
   Console::WriteLine( "Creation Date: {0}", Directory::GetCreationTime( n ) );
   Console::WriteLine( "UTC creation Date: {0}", Directory::GetCreationTimeUtc( n ) );
   Console::WriteLine( "Last write time: {0}", Directory::GetLastWriteTime( n ) );
   Console::WriteLine( "UTC last write time: {0}", Directory::GetLastWriteTimeUtc( n ) );
   Console::WriteLine( "Last access time: {0}", Directory::GetLastAccessTime( n ) );
   Console::WriteLine( "UTC last access time: {0}", Directory::GetLastAccessTimeUtc( n ) );
   
   //Set the last write time to a different value.
   Directory::SetLastWriteTimeUtc( n, dtime2 );
   Console::WriteLine( "Changed last write time: {0}", Directory::GetLastWriteTimeUtc( n ) );
}

// Obviously, since this sample deals with dates and times, the output will vary
// depending on when you run the executable. Here is one example of the output:
//Creation Date: 1/3/2002 12:00:00 AM
//UTC creation Date: 1/3/2002 8:00:00 AM
//Last write time: 12/31/1998 4:00:00 PM
//UTC last write time: 1/1/1999 12:00:00 AM
//Last access time: 1/2/2002 4:00:00 PM
//UTC last access time: 1/3/2002 12:00:00 AM
//Changed last write time: 1/1/1999 12:00:00 AM
// This sample shows the differences between dates from methods that use
//coordinated universal time (UTC) format and those that do not.
using System;
using System.IO;

namespace IOSamples
{
  public class DirectoryUTCTime
  {
    public static void Main()
    {
    // Set the directory.
      string n = @"C:\test\newdir";
        //Create two variables to use to set the time.
      DateTime dtime1 = new DateTime(2002, 1, 3);
      DateTime dtime2 = new DateTime(1999, 1, 1);

    //Create the directory.
      try
      {
          Directory.CreateDirectory(n);
      }
      catch (IOException e)
      {
          Console.WriteLine(e);
      }

    //Set the creation and last access times to a variable DateTime value.
      Directory.SetCreationTime(n, dtime1);
      Directory.SetLastAccessTimeUtc(n, dtime1);

        // Print to console the results.
      Console.WriteLine("Creation Date: {0}", Directory.GetCreationTime(n));
      Console.WriteLine("UTC creation Date: {0}", Directory.GetCreationTimeUtc(n));
      Console.WriteLine("Last write time: {0}", Directory.GetLastWriteTime(n));
      Console.WriteLine("UTC last write time: {0}", Directory.GetLastWriteTimeUtc(n));
      Console.WriteLine("Last access time: {0}", Directory.GetLastAccessTime(n));
      Console.WriteLine("UTC last access time: {0}", Directory.GetLastAccessTimeUtc(n));

        //Set the last write time to a different value.
      Directory.SetLastWriteTimeUtc(n, dtime2);
      Console.WriteLine("Changed last write time: {0}", Directory.GetLastWriteTimeUtc(n));
    }
  }
}
// Obviously, since this sample deals with dates and times, the output will vary
// depending on when you run the executable. Here is one example of the output:
//Creation Date: 1/3/2002 12:00:00 AM
//UTC creation Date: 1/3/2002 8:00:00 AM
//Last write time: 12/31/1998 4:00:00 PM
//UTC last write time: 1/1/1999 12:00:00 AM
//Last access time: 1/2/2002 4:00:00 PM
//UTC last access time: 1/3/2002 12:00:00 AM
//Changed last write time: 1/1/1999 12:00:00 AM
// This sample shows the differences between dates from methods that use
//coordinated universal time (UTC) format and those that do not.
open System
open System.IO

// Set the directory.
let n = @"C:\test\newdir"
//Create two variables to use to set the time.
let dtime1 = DateTime(2002, 1, 3)
let dtime2 = DateTime(1999, 1, 1)

//Create the directory.
try
    Directory.CreateDirectory n |> ignore
with :? IOException as e ->
    printfn $"{e}"

//Set the creation and last access times to a variable DateTime value.
Directory.SetCreationTime(n, dtime1)
Directory.SetLastAccessTimeUtc(n, dtime1)

// Print to console the results.
printfn $"Creation Date: {Directory.GetCreationTime n}"
printfn $"UTC creation Date: {Directory.GetCreationTimeUtc n}"
printfn $"Last write time: {Directory.GetLastWriteTime n}"
printfn $"UTC last write time: {Directory.GetLastWriteTimeUtc n}"
printfn $"Last access time: {Directory.GetLastAccessTime n}"
printfn $"UTC last access time: {Directory.GetLastAccessTimeUtc n}"

//Set the last write time to a different value.
Directory.SetLastWriteTimeUtc(n, dtime2)
printfn $"Changed last write time: {Directory.GetLastWriteTimeUtc n}"
// Obviously, since this sample deals with dates and times, the output will vary
// depending on when you run the executable. Here is one example of the output:
//Creation Date: 1/3/2002 12:00:00 AM
//UTC creation Date: 1/3/2002 8:00:00 AM
//Last write time: 12/31/1998 4:00:00 PM
//UTC last write time: 1/1/1999 12:00:00 AM
//Last access time: 1/2/2002 4:00:00 PM
//UTC last access time: 1/3/2002 12:00:00 AM
//Changed last write time: 1/1/1999 12:00:00 AM
' This sample shows the differences between dates from methods that use
'coordinated universal time (UTC) format and those that do not.
Imports System.IO



Public Class DirectoryUTCTime
   
   Public Shared Sub Main()
      ' Set the directory.
      Dim n As String = "C:\test\newdir"
      'Create two variables to use to set the time.
      Dim dtime1 As New DateTime(2002, 1, 3)
      Dim dtime2 As New DateTime(1999, 1, 1)
      
      'Create the directory.
      Try
         Directory.CreateDirectory(n)
      Catch e As IOException
         Console.WriteLine(e)
      End Try
      
      'Set the creation and last access times to a variable DateTime value.
      Directory.SetCreationTime(n, dtime1)
      Directory.SetLastAccessTimeUtc(n, dtime1)
      
      ' Print to console the results.
      Console.WriteLine("Creation Date: {0}", Directory.GetCreationTime(n))
      Console.WriteLine("UTC creation Date: {0}", Directory.GetCreationTimeUtc(n))
      Console.WriteLine("Last write time: {0}", Directory.GetLastWriteTime(n))
      Console.WriteLine("UTC last write time: {0}", Directory.GetLastWriteTimeUtc(n))
      Console.WriteLine("Last access time: {0}", Directory.GetLastAccessTime(n))
      Console.WriteLine("UTC last access time: {0}", Directory.GetLastAccessTimeUtc(n))
      
      'Set the last write time to a different value.
      Directory.SetLastWriteTimeUtc(n, dtime2)
      Console.WriteLine("Changed last write time: {0}", Directory.GetLastWriteTimeUtc(n))
   End Sub
End Class

' Since this sample deals with dates and times, the output will vary
' depending on when you run the executable. Here is one example of the output:

' Creation Date: 1/3/2002 12:00:00 AM
' UTC creation Date: 1/3/2002 8:00:00 AM
' Last write time: 12/31/1998 4:00:00 PM
' UTC last write time: 1/1/1999 12:00:00 AM
' Last access time: 1/2/2002 4:00:00 PM
' UTC last access time: 1/3/2002 12:00:00 AM
' Changed last write time: 1/1/1999 12:00:00 AM

Hinweise

Der path Parameter darf relative oder absolute Pfadinformationen angeben. Relative Pfadinformationen werden relativ zum aktuellen Arbeitsverzeichnis interpretiert. Informationen zum Abrufen des aktuellen Arbeitsverzeichnisses finden Sie unter GetCurrentDirectory.

Die Groß-/Kleinschreibung des path Parameters entspricht der des Dateisystems, in dem der Code ausgeführt wird. Beispielsweise wird bei NTFS (dem standardmäßigen Windows-Dateisystem) die Groß-/Kleinschreibung und bei Linux-Dateisystemen die Groß-/Kleinschreibung nicht beachtet.

Gilt für:

Weitere Informationen