from clause (C# Reference)

A query expression must begin with a from clause. Additionally, a query expression can contain sub-queries, which also begin with a from clause. The from clause specifies the following:

  • The data source on which the query or sub-query will be run.

  • A local range variable that represents each element in the source sequence.

Both the range variable and the data source are strongly typed. The data source referenced in the from clause must have a type of IEnumerable, IEnumerable<T>, or a derived type such as IQueryable<T>.

In the following example, numbers is the data source and num is the range variable. Note that both variables are strongly typed even through the var keyword is used.

class LowNums
{
    static void Main()
    {   
        // A simple data source. 
        int[] numbers = { 5, 4, 1, 3, 9, 8, 6, 7, 2, 0 };

        // Create the query. 
        // lowNums is an IEnumerable<int> 
        var lowNums = from num in numbers
            where num < 5
            select num;

        // Execute the query. 
        foreach (int i in lowNums)
        {
            Console.Write(i + " ");
        }
    }        
}
// Output: 4 1 3 2 0

The Range Variable

The compiler infers the type of the range variable when the data source implements IEnumerable<T>. For example, if the source has a type of IEnumerable<Customer>, then the range variable is inferred to be Customer. The only time that you must specify the type explicitly is when the source is a non-generic IEnumerable type such as ArrayList. For more information, see How to: Query an ArrayList with LINQ.

In the previous example num is inferred to be of type int. Because the range variable is strongly typed, you can call methods on it or use it in other operations. For example, instead of writing select num, you could write select num.ToString() to cause the query expression to return a sequence of strings instead of integers. Or you could write select n + 10 to cause the expression to return the sequence 14, 11, 13, 12, 10. For more information, see select clause (C# Reference).

The range variable is like an iteration variable in a foreach statement except for one very important difference: a range variable never actually stores data from the source. It just a syntactic convenience that enables the query to describe what will occur when the query is executed. For more information, see Introduction to LINQ Queries (C#).

Compound from Clauses

In some cases, each element in the source sequence may itself be either a sequence or contain a sequence. For example, your data source may be an IEnumerable<Student> where each student object in the sequence contains a list of test scores. To access the inner list within each Student element, you can use compound from clauses. The technique is like using nested foreach statements. You can add where or orderby clauses to either from clause to filter the results. The following example shows a sequence of Student objects, each of which contains an inner List of integers representing test scores. To access the inner list, use a compound from clause. You can insert clauses between the two from clauses if necessary.

class CompoundFrom
{
    // The element type of the data source. 
    public class Student
    {
        public string LastName { get; set; }
        public List<int> Scores {get; set;}
    }

    static void Main()
    {

        // Use a collection initializer to create the data source. Note that  
        // each element in the list contains an inner sequence of scores.
        List<Student> students = new List<Student>
        {
           new Student {LastName="Omelchenko", Scores= new List<int> {97, 72, 81, 60}},
           new Student {LastName="O'Donnell", Scores= new List<int> {75, 84, 91, 39}},
           new Student {LastName="Mortensen", Scores= new List<int> {88, 94, 65, 85}},
           new Student {LastName="Garcia", Scores= new List<int> {97, 89, 85, 82}},
           new Student {LastName="Beebe", Scores= new List<int> {35, 72, 91, 70}} 
        };        

        // Use a compound from to access the inner sequence within each element. 
        // Note the similarity to a nested foreach statement. 
        var scoreQuery = from student in students
                         from score in student.Scores
                            where score > 90
                            select new { Last = student.LastName, score };

        // Execute the queries.
        Console.WriteLine("scoreQuery:");
        // Rest the mouse pointer on scoreQuery in the following line to  
        // see its type. The type is IEnumerable<'a>, where 'a is an  
        // anonymous type defined as new {string Last, int score}. That is, 
        // each instance of this anonymous type has two members, a string  
        // (Last) and an int (score). 
        foreach (var student in scoreQuery)
        {
            Console.WriteLine("{0} Score: {1}", student.Last, student.score);
        }

        // Keep the console window open in debug mode.
        Console.WriteLine("Press any key to exit.");
        Console.ReadKey();
    }       
}
/*
scoreQuery:
Omelchenko Score: 97
O'Donnell Score: 91
Mortensen Score: 94
Garcia Score: 97
Beebe Score: 91
*/

Using Multiple from Clauses to Perform Joins

A compound from clause is used to access inner collections in a single data source. However, a query can also contain multiple from clauses that generate supplemental queries from independent data sources. This technique enables you to perform certain types of join operations that are not possible by using the join clause.

The following example shows how two from clauses can be used to form a complete cross join of two data sources.

class CompoundFrom2
{
    static void Main()
    {
        char[] upperCase = { 'A', 'B', 'C' };
        char[] lowerCase = { 'x', 'y', 'z' };

        // The type of joinQuery1 is IEnumerable<'a>, where 'a 
        // indicates an anonymous type. This anonymous type has two 
        // members, upper and lower, both of type char. 
        var joinQuery1 =
            from upper in upperCase
            from lower in lowerCase
            select new { upper, lower };

        // The type of joinQuery2 is IEnumerable<'a>, where 'a 
        // indicates an anonymous type. This anonymous type has two 
        // members, upper and lower, both of type char. 
        var joinQuery2 =
            from lower in lowerCase
            where lower != 'x'
            from upper in upperCase
            select new { lower, upper };


        // Execute the queries.
        Console.WriteLine("Cross join:");
        // Rest the mouse pointer on joinQuery1 to verify its type. 
        foreach (var pair in joinQuery1)
        {
            Console.WriteLine("{0} is matched to {1}", pair.upper, pair.lower);
        }

        Console.WriteLine("Filtered non-equijoin:");
        // Rest the mouse pointer over joinQuery2 to verify its type. 
        foreach (var pair in joinQuery2)
        {
            Console.WriteLine("{0} is matched to {1}", pair.lower, pair.upper);
        }

        // Keep the console window open in debug mode.
        Console.WriteLine("Press any key to exit.");
        Console.ReadKey();
    }
}
/* Output:
        Cross join:
        A is matched to x
        A is matched to y
        A is matched to z
        B is matched to x
        B is matched to y
        B is matched to z
        C is matched to x
        C is matched to y
        C is matched to z
        Filtered non-equijoin:
        y is matched to A
        y is matched to B
        y is matched to C
        z is matched to A
        z is matched to B
        z is matched to C
        */

For more information about join operations that use multiple from clauses, see How to: Perform Custom Join Operations (C# Programming Guide).

See Also

Concepts

LINQ Query Expressions (C# Programming Guide)

Other Resources

Query Keywords (C# Reference)